ePath R4 Implementation Guide
1.0.0 - ci-build Japan

ePath R4 Implementation Guide - Local Development build (v1.0.0) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Resource Profile: EPath_Observation_Execution - Detailed Descriptions

Active as of 2025-09-25

Definitions for the epath-observation-execution resource profile.

Guidance on how to interpret the contents of this table can be foundhere

0. Observation
Definition

患者、デバイス、またはその他の主題について行われた測定と簡単な主張。 / Measurements and simple assertions made about a patient, device or other subject.

Short測定と簡単なアサーション / Measurements and simple assertions
Comments

デバイスの測定、実験室の原子結果、バイタルサイン、身長、体重、喫煙状況、コメントなどの単純な観測に使用されます。その他のリソースは、実験室レポートなどの観察のコンテキストを提供するために使用されます。 / Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

Control0..*
Is Modifierfalse
Summaryfalse
Alternate NamesVital Signs, Measurement, Results, Tests
Invariantsdom-2: リソースが別のリソースに含まれている場合、ネストされたリソースを含めてはなりません / If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: リソースが別のリソースに含まれている場合、それはリソースの他の場所から参照されるか、含有リソースを参照するものとします / If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: リソースが別のリソースに含まれている場合、meta.versionidまたはmeta.lastupdatedを持たないものとします / If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: 別のリソースにリソースが含まれている場合、セキュリティラベルはありません / If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: リソースには、堅牢な管理のための叙述(Narative)が必要です / A resource should have narrative for robust management (text.`div`.exists())
obs-6: databsentrasonは、観察.value [x]が存在しない場合にのみ存在するものとします / dataAbsentReason SHALL only be present if Observation.value[x] is not present (dataAbsentReason.empty() or value.empty())
obs-7: visserveration.codeがvisserveration.component.codeと同じ場合、コードに関連付けられている値要素が存在しないでください / If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present (value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty())
obs-6: databsentrasonは、観察.value [x]が存在しない場合にのみ存在するものとします / dataAbsentReason SHALL only be present if Observation.value[x] is not present (dataAbsentReason.empty() or value.empty())
obs-7: visserveration.codeがvisserveration.component.codeと同じ場合、コードに関連付けられている値要素が存在しないでください / If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present (value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty())
2. Observation.meta
Definition

リソースに関するメタデータ。これは、インフラストラクチャによって維持されるコンテンツです。コンテンツの変更は、常にリソースのバージョンの変更に関連付けられているとは限りません。 / The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

Shortリソースに関するメタデータ / Metadata about the resource
Control10..1
TypeMeta
Is Modifierfalse
Summarytrue
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Observation.meta.profile
Definition

このリソースが準拠すると主張する StructureDefinition リソースに関するプロファイルのリストです。URL は StructureDefinition.url への参照です。


このリソースが準拠すると主張する StructureDefinition リソースに関するプロファイルのリストです。URL は StructureDefinition.url への参照です。

Shortこのリソースが適合を主張するプロファイル
Comments

これらの主張が時間の経過に伴って検証または更新される方法と、それらを決定するサーバーや他の基盤に任されます。プロファイルURLのリストは1セットです。

Control10..1*
Typecanonical(StructureDefinition)
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuehttp://e-path.jp/fhir/ePath/StructureDefinition/EPath_Observation_Execution
Invariantsele-1: すべてのFHIR要素は、@valueまたはchildrenを持っている必要があります。 (hasValue() or (children().count() > id.count()))
6. Observation.implicitRules
Definition

リソースが構築されたときに従った一連のルールへの参照。コンテンツの処理時に理解する必要があります。多くの場合、これは他のプロファイルなどとともに特別なルールを定義する実装ガイドへの参照です。 / A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Shortこのコンテンツが作成されたルールのセット / A set of rules under which this content was created
Comments

このルールセットを主張することは、コンテンツが限られた取引パートナーのセットによってのみ理解されることを制限します。これにより、本質的に長期的にデータの有用性が制限されます。ただし、既存の健康エコシステムは非常に破壊されており、一般的に計算可能な意味でデータを定義、収集、交換する準備ができていません。可能な限り、実装者や仕様ライターはこの要素の使用を避ける必要があります。多くの場合、使用する場合、URLは、これらの特別なルールを他のプロファイル、バリューセットなどとともに叙述(Narative)の一部として定義する実装ガイドへの参照です。 / Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because 暗黙のルールは、意味または解釈を変更するリソースに関する追加の知識を提供する可能性があるため、この要素は修飾子としてラベル付けされています。 / This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. Observation.modifierExtension
Definition

リソースの基本的な定義の一部ではなく、それを含む要素の理解および/または含有要素の子孫の理解を変更するために使用される場合があります。通常、修飾子要素は否定または資格を提供します。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義することが許可されていますが、拡張機能の定義の一部として満たされる一連の要件があります。アプリケーションの処理リソースは、修飾子拡張機能をチェックする必要があります。

モディファイア拡張は、リソースまたはdomainResource上の要素の意味を変更してはなりません(修飾軸自体の意味を変更することはできません)。 / May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Short無視できない拡張機能 / Extensions that cannot be ignored
Comments

拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because モディファイア拡張は、それらを含むリソースの意味または解釈を変更することが期待されています / Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

修飾子拡張機能により、安全に無視できる大部分の拡張機能と明確に区別できるように、安全に無視できない拡張機能が可能になります。これにより、実装者が拡張の存在を禁止する必要性を排除することにより、相互運用性が促進されます。詳細については、[修飾子拡張の定義](拡張性.html#modifierextension)を参照してください。 / Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
10. Observation.identifier
Definition

この観察に割り当てられた一意の識別子。 / A unique identifier assigned to this observation.

Short観察のためのビジネス識別子 / Business Identifier for observation
NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
TypeIdentifier
Is Modifierfalse
Summarytrue
Requirements

観測を区別し、参照することを可能にします。 / Allows observations to be distinguished and referenced.

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Observation.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ system
  • 12. Observation.identifier:resourceInstanceIdentifier
    Slice NameresourceInstanceIdentifier
    Definition

    この観察に割り当てられた一意の識別子。 / A unique identifier assigned to this observation.

    Shortリソースインスタンス識別子観察のためのビジネス識別子 / Business Identifier for observation
    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control0..1*
    TypeIdentifier
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Requirements

    観測を区別し、参照することを可能にします。 / Allows observations to be distinguished and referenced.

    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    14. Observation.identifier:resourceInstanceIdentifier.use
    Definition

    この識別子の目的。 / The purpose of this identifier.

    Short通常|公式|温度|セカンダリ|古い(知られている場合) / usual | official | temp | secondary | old (If known)
    Comments

    アプリケーションは、識別子が一時的なものであると明示的に言っていない限り、永続的であると想定できます。 / Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

    Control0..1
    BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
    (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

    既知の場合、この識別子の目的を識別します。 / Identifies the purpose for this identifier, if known .

    Typecode
    Is Modifiertrue because これは、アプリケーションが一時的なIDを永続的なIDと間違えてはならないため、「IS修飾子」とラベル付けされています。 / This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    特定の使用のコンテキストが一連の識別子の中から選択される適切な識別子を許可します。 / Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    16. Observation.identifier:resourceInstanceIdentifier.system
    Definition

    値の名前空間、つまり一意のセット値を記述するURLを確立します。 / Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

    Short識別子値の名前空間 / The namespace for the identifier value
    Comments

    識別子。システムは常にケースに敏感です。 / Identifier.system is always case sensitive.

    Control10..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    識別子のセットがたくさんあります。2つの識別子を一致させるには、どのセットを扱っているかを知る必要があります。システムは、特定の一意の識別子セットを識別します。 / There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

    Fixed Valuehttp://e-path.jp/fhir/ePath/IdSystem/resourceInstance-identifier
    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    18. Observation.identifier:resourceInstanceIdentifier.value
    Definition

    通常、識別子の部分はユーザーに関連し、システムのコンテキスト内で一意のユーザーに関連しています。 / The portion of the identifier typically relevant to the user and which is unique within the context of the system.

    Short一意の値 / The value that is unique
    Comments

    値が完全なURIの場合、システムはurn:ietf:rfc:3986でなければなりません。値の主な目的は、計算マッピングです。その結果、比較目的で正規化される可能性があります(例えば、有意でない白文字、ダッシュなどの削除)ヒューマンディスプレイ用の値は、[レンダリングされた値拡張](拡張レンダリングValue.html)を使用して伝達できます。識別子。価値は、識別子の知識を使用しない限り、ケースに敏感なものとして扱われます。システムにより、プロセッサーは、非セイズに固有の処理が安全であると確信できます。 / If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

    Control10..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    20. Observation.identifier:questionnaireLinkId
    Slice NamequestionnaireLinkId
    Definition

    deriverFrom に QuestionnaireResponse が指定されている場合、その入力コントロールに対応するlinkIdを指定する。


    この観察に割り当てられた一意の識別子。 / A unique identifier assigned to this observation.

    Short質問回答のリンクID観察のためのビジネス識別子 / Business Identifier for observation
    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control0..1*
    TypeIdentifier
    Is Modifierfalse
    Summarytrue
    Requirements

    観測を区別し、参照することを可能にします。 / Allows observations to be distinguished and referenced.

    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    22. Observation.identifier:questionnaireLinkId.use
    Definition

    この識別子の目的。 / The purpose of this identifier.

    Short通常|公式|温度|セカンダリ|古い(知られている場合) / usual | official | temp | secondary | old (If known)
    Comments

    アプリケーションは、識別子が一時的なものであると明示的に言っていない限り、永続的であると想定できます。 / Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

    Control0..1
    BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
    (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

    既知の場合、この識別子の目的を識別します。 / Identifies the purpose for this identifier, if known .

    Typecode
    Is Modifiertrue because これは、アプリケーションが一時的なIDを永続的なIDと間違えてはならないため、「IS修飾子」とラベル付けされています。 / This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    特定の使用のコンテキストが一連の識別子の中から選択される適切な識別子を許可します。 / Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    24. Observation.identifier:questionnaireLinkId.system
    Definition

    値の名前空間、つまり一意のセット値を記述するURLを確立します。 / Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

    Short識別子値の名前空間 / The namespace for the identifier value
    Comments

    識別子。システムは常にケースに敏感です。 / Identifier.system is always case sensitive.

    Control10..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    識別子のセットがたくさんあります。2つの識別子を一致させるには、どのセットを扱っているかを知る必要があります。システムは、特定の一意の識別子セットを識別します。 / There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

    Fixed Valuehttp://e-path.jp/fhir/ePath/IdSystem/questionnaireResponse-linkId
    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    26. Observation.identifier:questionnaireLinkId.value
    Definition

    通常、識別子の部分はユーザーに関連し、システムのコンテキスト内で一意のユーザーに関連しています。 / The portion of the identifier typically relevant to the user and which is unique within the context of the system.

    Short一意の値 / The value that is unique
    Comments

    値が完全なURIの場合、システムはurn:ietf:rfc:3986でなければなりません。値の主な目的は、計算マッピングです。その結果、比較目的で正規化される可能性があります(例えば、有意でない白文字、ダッシュなどの削除)ヒューマンディスプレイ用の値は、[レンダリングされた値拡張](拡張レンダリングValue.html)を使用して伝達できます。識別子。価値は、識別子の知識を使用しない限り、ケースに敏感なものとして扱われます。システムにより、プロセッサーは、非セイズに固有の処理が安全であると確信できます。 / If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

    Control10..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    28. Observation.status
    Definition

    実施情報の場合、finalを設定する。修正情報の場合、cancelledを設定する。


    結果値のステータス。 / The status of the result value.

    Short登録|予備|ファイナル|修正 + / registered | preliminary | final | amended +
    Comments

    この要素は、リソースを現在有効ではないとマークするコードが含まれているため、修飾子としてラベル付けされています。 / This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

    Control1..1
    BindingThe codes SHALL be taken from ObservationStatushttp://hl7.org/fhir/ValueSet/observation-status|4.0.1
    (required to http://hl7.org/fhir/ValueSet/observation-status|4.0.1)

    観察のステータスを提供するコード。 / Codes providing the status of an observation.

    Typecode
    Is Modifiertrue because この要素は、リソースを有効として扱うべきではないことを意味するステータスに入力されたステータスを含むステータス要素であるため、修飾子としてラベル付けされています。 / This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Requirements

    個々の結果のステータスを追跡する必要があります。レポート全体が最終決定される前に、いくつかの結果が確定します。 / Need to track the status of individual results. Some results are finalized before the whole report is finalized.

    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    30. Observation.category
    Definition

    行われている一般的なタイプの観測を分類するコード。 / A code that classifies the general type of observation being made.

    Short観察の種類の分類 / Classification of type of observation
    Comments

    必要なカテゴリバリューセットに加えて、この要素は、所有者のカテゴリの定義に基づいてさまざまな分類スキームを許可し、効果的に複数のカテゴリを一度に使用できます。粒度のレベルは、値セットのカテゴリの概念によって定義されます。 / In addition to the required category valueset, this element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used at once. The level of granularity is defined by the category concepts in the value set.

    Control0..*
    BindingThe codes SHOULD be taken from ObservationCategoryCodeshttp://hl7.org/fhir/ValueSet/observation-category|4.0.1
    (preferred to http://hl7.org/fhir/ValueSet/observation-category|4.0.1)

    高レベルの観測カテゴリのコード。 / Codes for high level observation categories.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Requirements

    どの観測値が取得されて表示されるかをフィルタリングするために使用されます。 / Used for filtering what observations are retrieved and displayed.

    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    SlicingThis element introduces a set of slices on Observation.category. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ coding.system
    • 32. Observation.category:BOMAssessmentCategory
      Slice NameBOMAssessmentCategory
      Definition

      BOM観察項目分類コード・名称 「BOM観察項目分類コード」より設定する。


      行われている一般的なタイプの観測を分類するコード。 / A code that classifies the general type of observation being made.

      ShortBOM観察項目分類コード・名称観察の種類の分類 / Classification of type of observation
      Comments

      必要なカテゴリバリューセットに加えて、この要素は、所有者のカテゴリの定義に基づいてさまざまな分類スキームを許可し、効果的に複数のカテゴリを一度に使用できます。粒度のレベルは、値セットのカテゴリの概念によって定義されます。 / In addition to the required category valueset, this element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used at once. The level of granularity is defined by the category concepts in the value set.

      Control0..*
      BindingThe codes SHOULD be taken from ObservationCategoryCodeshttp://hl7.org/fhir/ValueSet/observation-category|4.0.1
      (preferred to http://hl7.org/fhir/ValueSet/observation-category|4.0.1)

      高レベルの観測カテゴリのコード。 / Codes for high level observation categories.

      TypeCodeableConcept
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Requirements

      どの観測値が取得されて表示されるかをフィルタリングするために使用されます。 / Used for filtering what observations are retrieved and displayed.

      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      34. Observation.category:BOMAssessmentCategory.coding
      Definition

      用語システムによって定義されたコードへの参照。 / A reference to a code defined by a terminology system.

      Short用語システムによって定義されたコード / Code defined by a terminology system
      Comments

      コードは、列挙されたCTなどの非常に正式な定義まで、列挙またはコードリストで非常にさりげなく定義される場合があります。詳細については、HL7 V3コアプリンシップを参照してください。コーディングの順序付けは未定義であり、意味を推測するために使用されません。一般に、せいぜい、コーディング値の1つのみがuserselected = trueとしてラベル付けされます。 / Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

      Control0..*
      BindingThe codes SHOULD be taken from For codes, see EPath_AssessmentCategory_VS
      (preferred to http://e-path.jp/fhir/ePath/ValueSet/EPath_AssessmentCategory_VS)
      TypeCoding
      Is Modifierfalse
      Summarytrue
      Requirements

      コードシステム内の代替エンコーディング、および他のコードシステムへの翻訳が可能になります。 / Allows for alternative encodings within a code system, and translations to other code systems.

      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      36. Observation.category:BOMAssessmentCategory.coding.system
      Definition

      コード内のシンボルの意味を定義するコードシステムの識別。 / The identification of the code system that defines the meaning of the symbol in the code.

      Short用語システムのアイデンティティ / Identity of the terminology system
      Comments

      uriは、oid(urn:oid:...)またはuuid(urn:uuid:...)である場合があります。OIDとUUIDは、HL7 OIDレジストリへの参照となります。それ以外の場合、URIは、FHIRの特別なURIを定義したHL7のリストから来るか、システムを明確かつ明確に確立する定義を参照する必要があります。 / The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

      Control10..1
      Typeuri
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      シンボルの定義のソースについて明確である必要があります。 / Need to be unambiguous about the source of the definition of the symbol.

      Fixed Valueurn:oid:1.2.392.200250.3.2.200.40
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      38. Observation.category:BOMAssessmentCategory.coding.code
      Definition

      システムによって定義された構文のシンボル。シンボルは、定義されたコードまたはコーディングシステムによって定義された構文の式(例:調整後)である場合があります。 / A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

      Shortシステムによって定義された構文のシンボル / Symbol in syntax defined by the system
      Control10..1
      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      システム内の特定のコードを参照する必要があります。 / Need to refer to a particular code in the system.

      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      40. Observation.category:BOMAssessmentCategory.coding.display
      Definition

      システムのルールに従って、システム内のコードの意味の表現。 / A representation of the meaning of the code in the system, following the rules of the system.

      Shortシステムによって定義された表現 / Representation defined by the system
      Control10..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      システムを知らない読者のために、コードの人間の読み取り可能な意味を持ち込むことができる必要があります。 / Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      42. Observation.code
      Definition

      観察されたものについて説明します。時々、これは観察「名前」と呼ばれます。 / Describes what was observed. Sometimes this is called the observation "name".

      Short観察項目コード観察の種類(コード /タイプ) / Type of observation (code / type)
      Comments

      すべて code-valueおよび存在する場合、component.code-component.valueペアを考慮する必要があります。観察の意味を正しく理解する必要があります。 / All code-value and, if present, component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

      Control1..1
      BindingFor example codes, see LOINCCodeshttp://hl7.org/fhir/ValueSet/observation-codes|4.0.1
      (example to http://hl7.org/fhir/ValueSet/observation-codes)

      観察項目コード


      単純な観測の名前を識別するコード。 / Codes identifying names of simple observations.

      TypeCodeableConcept
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      どのような観察が行われているかを知ることは、観察を理解するために不可欠です。 / Knowing what kind of observation is being made is essential to understanding the observation.

      Alternate NamesName
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      44. Observation.code.coding
      Definition

      用語システムによって定義されたコードへの参照。 / A reference to a code defined by a terminology system.

      Short用語システムによって定義されたコード / Code defined by a terminology system
      Comments

      コードは、列挙されたCTなどの非常に正式な定義まで、列挙またはコードリストで非常にさりげなく定義される場合があります。詳細については、HL7 V3コアプリンシップを参照してください。コーディングの順序付けは未定義であり、意味を推測するために使用されません。一般に、せいぜい、コーディング値の1つのみがuserselected = trueとしてラベル付けされます。 / Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

      Control0..*
      TypeCoding
      Is Modifierfalse
      Summarytrue
      Requirements

      コードシステム内の代替エンコーディング、および他のコードシステムへの翻訳が可能になります。 / Allows for alternative encodings within a code system, and translations to other code systems.

      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      SlicingThis element introduces a set of slices on Observation.code.coding. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ system
      • 46. Observation.code.coding:BOMAssessmentCode
        Slice NameBOMAssessmentCode
        Definition

        BOM観察項目コード・名称 「BOM観察項目コード」より設定する。


        用語システムによって定義されたコードへの参照。 / A reference to a code defined by a terminology system.

        ShortBOM観察項目分類コード・名称用語システムによって定義されたコード / Code defined by a terminology system
        Comments

        コードは、列挙されたCTなどの非常に正式な定義まで、列挙またはコードリストで非常にさりげなく定義される場合があります。詳細については、HL7 V3コアプリンシップを参照してください。コーディングの順序付けは未定義であり、意味を推測するために使用されません。一般に、せいぜい、コーディング値の1つのみがuserselected = trueとしてラベル付けされます。 / Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

        Control0..1*
        BindingThe codes SHOULD be taken from For codes, see EPath_AssessmentCode_VS
        (preferred to http://e-path.jp/fhir/ePath/ValueSet/EPath_AssessmentCode_VS)
        TypeCoding
        Is Modifierfalse
        Summarytrue
        Requirements

        コードシステム内の代替エンコーディング、および他のコードシステムへの翻訳が可能になります。 / Allows for alternative encodings within a code system, and translations to other code systems.

        Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        48. Observation.code.coding:BOMAssessmentCode.system
        Definition

        コード内のシンボルの意味を定義するコードシステムの識別。 / The identification of the code system that defines the meaning of the symbol in the code.

        Short用語システムのアイデンティティ / Identity of the terminology system
        Comments

        uriは、oid(urn:oid:...)またはuuid(urn:uuid:...)である場合があります。OIDとUUIDは、HL7 OIDレジストリへの参照となります。それ以外の場合、URIは、FHIRの特別なURIを定義したHL7のリストから来るか、システムを明確かつ明確に確立する定義を参照する必要があります。 / The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

        Control10..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Requirements

        シンボルの定義のソースについて明確である必要があります。 / Need to be unambiguous about the source of the definition of the symbol.

        Fixed Valueurn:oid:1.2.392.200250.3.2.200.50
        Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        50. Observation.code.coding:BOMAssessmentCode.code
        Definition

        システムによって定義された構文のシンボル。シンボルは、定義されたコードまたはコーディングシステムによって定義された構文の式(例:調整後)である場合があります。 / A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

        Shortシステムによって定義された構文のシンボル / Symbol in syntax defined by the system
        Control10..1
        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Requirements

        システム内の特定のコードを参照する必要があります。 / Need to refer to a particular code in the system.

        Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        52. Observation.code.coding:BOMAssessmentCode.display
        Definition

        システムのルールに従って、システム内のコードの意味の表現。 / A representation of the meaning of the code in the system, following the rules of the system.

        Shortシステムによって定義された表現 / Representation defined by the system
        Control10..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Requirements

        システムを知らない読者のために、コードの人間の読み取り可能な意味を持ち込むことができる必要があります。 / Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

        Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        54. Observation.code.coding:LocalAssessmentCode
        Slice NameLocalAssessmentCode
        Definition

        用語システムによって定義されたコードへの参照。 / A reference to a code defined by a terminology system.

        Short観察項目コード・名称用語システムによって定義されたコード / Code defined by a terminology system
        Comments

        コードは、列挙されたCTなどの非常に正式な定義まで、列挙またはコードリストで非常にさりげなく定義される場合があります。詳細については、HL7 V3コアプリンシップを参照してください。コーディングの順序付けは未定義であり、意味を推測するために使用されません。一般に、せいぜい、コーディング値の1つのみがuserselected = trueとしてラベル付けされます。 / Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

        Control0..1*
        TypeCoding
        Is Modifierfalse
        Summarytrue
        Requirements

        コードシステム内の代替エンコーディング、および他のコードシステムへの翻訳が可能になります。 / Allows for alternative encodings within a code system, and translations to other code systems.

        Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        56. Observation.code.coding:LocalAssessmentCode.system
        Definition

        コード内のシンボルの意味を定義するコードシステムの識別。 / The identification of the code system that defines the meaning of the symbol in the code.

        Short用語システムのアイデンティティ / Identity of the terminology system
        Comments

        uriは、oid(urn:oid:...)またはuuid(urn:uuid:...)である場合があります。OIDとUUIDは、HL7 OIDレジストリへの参照となります。それ以外の場合、URIは、FHIRの特別なURIを定義したHL7のリストから来るか、システムを明確かつ明確に確立する定義を参照する必要があります。 / The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

        Control10..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Requirements

        シンボルの定義のソースについて明確である必要があります。 / Need to be unambiguous about the source of the definition of the symbol.

        Fixed Valuehttp://e-path.jp/fhir/ePath/CodeSystem/EPath_LocalAssessmentCode_CS"
        Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        58. Observation.code.coding:LocalAssessmentCode.code
        Definition

        システムによって定義された構文のシンボル。シンボルは、定義されたコードまたはコーディングシステムによって定義された構文の式(例:調整後)である場合があります。 / A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

        Shortシステムによって定義された構文のシンボル / Symbol in syntax defined by the system
        Control10..1
        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Requirements

        システム内の特定のコードを参照する必要があります。 / Need to refer to a particular code in the system.

        Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        60. Observation.code.coding:LocalAssessmentCode.display
        Definition

        システムのルールに従って、システム内のコードの意味の表現。 / A representation of the meaning of the code in the system, following the rules of the system.

        Shortシステムによって定義された表現 / Representation defined by the system
        Control10..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Requirements

        システムを知らない読者のために、コードの人間の読み取り可能な意味を持ち込むことができる必要があります。 / Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

        Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        62. Observation.subject
        Definition

        患者、または患者のグループ、場所、またはデバイスこの観察結果は、観察が置かれている記録についてであり、その記録にあります。観測の実際の焦点が被験者(または被験者の部分、または領域のサンプル)とは異なる場合、「フォーカス」要素または「コード」自体が観測の実際の焦点を指定します。 / The patient, or group of patients, location, or device this observation is about and into whose record the observation is placed. If the actual focus of the observation is different from the subject (or a sample of, part, or region of the subject), the focus element or the code itself specifies the actual focus of the observation.

        Short誰と/または観察が何であるか / Who and/or what the observation is about
        Comments

        この要素は1..1のカーディナリティになると予想されます。被験者が欠落している唯一の状況は、患者を知らないデバイスによって観察が行われる場合です。この場合、観察は、ある程度のコンテキスト/チャネルマッチング手法を介して患者と一致し、この時点で観察を更新する必要があります。 / One would expect this element to be a cardinality of 1..1. The only circumstance in which the subject can be missing is when the observation is made by a device that does not know the patient. In this case, the observation SHALL be matched to a patient through some context/channel matching technique, and at this point, the observation should be updated.

        Control0..1
        TypeReference(JP Core Patient Profile, Patient, Group, Device, Location)
        Is Modifierfalse
        Summarytrue
        Requirements

        あなたが彼らが誰または何をしているのかわからない場合、観察には価値がありません。 / Observations have no value if you don't know who or what they're about.

        Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        64. Observation.effective[x]
        Definition

        観察された値が真実であると主張される時間または時間期。生物学的被験者の場合 - 例えばヒト患者 - これは通常、「生理学的に関連する時間」と呼ばれます。これは通常、手順または標本収集の時間ですが、日付/時刻のソースは不明であり、日付/時刻自体のみです。 / The time or time-period the observed value is asserted as being true. For biological subjects - e.g. human patients - this is usually called the "physiologically relevant time". This is usually either the time of the procedure or of specimen collection, but very often the source of the date/time is not known, only the date/time itself.

        Short測定日時観察のための臨床的に関連する時間/時間期 / Clinically relevant time/time-period for observation
        Comments

        この観察が歴史的な報告でない限り、少なくとも日付が存在する必要があります。不正確または「ファジー」時間(たとえば、「朝食後」に採取された血糖測定)を記録するには、[タイミング](datatypes.html#タイミング)データタイプを使用して、測定を通常の生活イベントに結び付けます。 / At least a date should be present unless this observation is a historical report. For recording imprecise or "fuzzy" times (For example, a blood glucose measurement taken "after breakfast") use the Timing datatype which allow the measurement to be tied to regular life events.

        Control0..1
        TypedateTime, Period, Timing, instant
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Requirements

        観察が真実と見なされた時期を知ることは、その関連性にとって重要であり、傾向を決定します。 / Knowing when an observation was deemed true is important to its relevance as well as determining trends.

        Alternate NamesOccurrence
        Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        66. Observation.value[x]
        Definition

        情報が単純な値を持っている場合、観察結果の結果として決定された情報。 / The information determined as a result of making the observation, if the information has a simple value.

        Short結果値・結果値単位実結果 / Actual result
        Comments

        観察にはあります。1)ここでの単一の値、2)関連する値とコンポーネント値のセット、または3)関連またはコンポーネント値のセットのみ。値が存在する場合、この要素のデータ型は、viscervation.codeによって決定する必要があります。フィールドが通常コーディングされている場合、または観測に関連付けられたタイプの場合、文字列の代わりにテキストのみを持つCodeableconecteが使用されます。コードはコード化された値を定義します。追加のガイダンスについては、以下の[[メモ]セクション]([観察.html#注)を参照してください。 / An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

        Control0..1
        This element is affected by the following invariants: obs-7
        TypeChoice of: Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Must Support TypesNo must-support rules about the choice of types/profiles
        Summarytrue
        Requirements

        観測は値を持つように存在しますが、それが誤っている場合、または観測のグループを表す場合はそうではありません。 / An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

        Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        68. Observation.note
        Definition

        修正情報の場合、修正事由を設定する。


        観察または結果についてのコメント。 / Comments about the observation or the results.

        Short修正事由観察についてのコメント / Comments about the observation
        Comments

        観察に関する一般的な声明、またはその解釈に関連する場合、重要な、予期しない、または信頼できない結果の値、またはそのソースに関する情報に関する声明が含まれる場合があります。 / May include general statements about the observation, or statements about significant, unexpected or unreliable results values, or information about its source when relevant to its interpretation.

        Control0..*
        TypeAnnotation
        Is Modifierfalse
        Summaryfalse
        Requirements

        無料のテキストの追加情報を提供できる必要があります。 / Need to be able to provide free text additional information.

        Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        70. Observation.derivedFrom
        Definition

        例えば、患者入力フォームのデータを観察結果として反映した場合に元となるQuestionnaireResponseの識別子を設定する。


        この観測値が導出される測定値を表すターゲットリソース。たとえば、超音波画像に基づいた計算された陰イオンギャップまたは胎児測定。 / The target resource that represents a measurement from which this observation value is derived. For example, a calculated anion gap or a fetal measurement based on an ultrasound image.

        Short観察結果の派生元関連測定観測はから行われます / Related measurements the observation is made from
        Comments

        この要素にリストされているすべての参照選択は、導出された値のソースとなる可能性のある臨床観察およびその他の測定値を表すことができます。最も一般的な参照は、別の観察です。観察結果がグループで組み立てられる方法についての議論については、以下の[注](obervation.html#obsgrouping)を参照してください。 / All the reference choices that are listed in this element can represent clinical observations and other measurements that may be the source for a derived value. The most common reference will be another Observation. For a discussion on the ways Observations can assembled in groups together, see Notes below.

        Control0..*
        TypeReference(DocumentReference, ImagingStudy, Media, QuestionnaireResponse, Observation, MolecularSequence)
        Is Modifierfalse
        Must Supportfalse
        Summarytrue
        Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

        Guidance on how to interpret the contents of this table can be foundhere

        0. Observation
        2. Observation.meta
        Control1..?
        4. Observation.meta.profile
        Control1..1
        Must Supporttrue
        Fixed Valuehttp://e-path.jp/fhir/ePath/StructureDefinition/EPath_Observation_Execution
        6. Observation.identifier
        NoteThis is a business identifier, not a resource identifier (see discussion)
        SlicingThis element introduces a set of slices on Observation.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ system
        • 8. Observation.identifier:resourceInstanceIdentifier
          Slice NameresourceInstanceIdentifier
          Shortリソースインスタンス識別子
          NoteThis is a business identifier, not a resource identifier (see discussion)
          Control0..1
          Must Supportfalse
          10. Observation.identifier:resourceInstanceIdentifier.system
          Control1..?
          Fixed Valuehttp://e-path.jp/fhir/ePath/IdSystem/resourceInstance-identifier
          12. Observation.identifier:resourceInstanceIdentifier.value
          Control1..?
          14. Observation.identifier:questionnaireLinkId
          Slice NamequestionnaireLinkId
          Definition

          deriverFrom に QuestionnaireResponse が指定されている場合、その入力コントロールに対応するlinkIdを指定する。

          Short質問回答のリンクID
          NoteThis is a business identifier, not a resource identifier (see discussion)
          Control0..1
          16. Observation.identifier:questionnaireLinkId.system
          Control1..?
          Fixed Valuehttp://e-path.jp/fhir/ePath/IdSystem/questionnaireResponse-linkId
          18. Observation.identifier:questionnaireLinkId.value
          Control1..?
          20. Observation.status
          Definition

          実施情報の場合、finalを設定する。修正情報の場合、cancelledを設定する。

          Must Supporttrue
          22. Observation.category
          SlicingThis element introduces a set of slices on Observation.category. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ coding.system
          • 24. Observation.category:BOMAssessmentCategory
            Slice NameBOMAssessmentCategory
            Definition

            BOM観察項目分類コード・名称 「BOM観察項目分類コード」より設定する。

            ShortBOM観察項目分類コード・名称
            Control0..*
            Must Supportfalse
            26. Observation.category:BOMAssessmentCategory.coding
            BindingThe codes SHOULD be taken from EPath_AssessmentCategory_VS
            (preferred to http://e-path.jp/fhir/ePath/ValueSet/EPath_AssessmentCategory_VS)
            28. Observation.category:BOMAssessmentCategory.coding.system
            Control1..?
            Must Supporttrue
            Fixed Valueurn:oid:1.2.392.200250.3.2.200.40
            30. Observation.category:BOMAssessmentCategory.coding.code
            Control1..?
            Must Supporttrue
            32. Observation.category:BOMAssessmentCategory.coding.display
            Control1..?
            Must Supporttrue
            34. Observation.code
            Short観察項目コード
            BindingFor example codes, see LOINCCodes
            (example to http://hl7.org/fhir/ValueSet/observation-codes)

            観察項目コード

            Must Supporttrue
            36. Observation.code.coding
            SlicingThis element introduces a set of slices on Observation.code.coding. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ system
            • 38. Observation.code.coding:BOMAssessmentCode
              Slice NameBOMAssessmentCode
              Definition

              BOM観察項目コード・名称 「BOM観察項目コード」より設定する。

              ShortBOM観察項目分類コード・名称
              Control0..1
              BindingThe codes SHOULD be taken from EPath_AssessmentCode_VS
              (preferred to http://e-path.jp/fhir/ePath/ValueSet/EPath_AssessmentCode_VS)
              40. Observation.code.coding:BOMAssessmentCode.system
              Control1..?
              Must Supporttrue
              Fixed Valueurn:oid:1.2.392.200250.3.2.200.50
              42. Observation.code.coding:BOMAssessmentCode.code
              Control1..?
              Must Supporttrue
              44. Observation.code.coding:BOMAssessmentCode.display
              Control1..?
              Must Supporttrue
              46. Observation.code.coding:LocalAssessmentCode
              Slice NameLocalAssessmentCode
              Short観察項目コード・名称
              Control0..1
              48. Observation.code.coding:LocalAssessmentCode.system
              Control1..?
              Must Supporttrue
              Fixed Valuehttp://e-path.jp/fhir/ePath/CodeSystem/EPath_LocalAssessmentCode_CS"
              50. Observation.code.coding:LocalAssessmentCode.code
              Control1..?
              Must Supporttrue
              52. Observation.code.coding:LocalAssessmentCode.display
              Control1..?
              Must Supporttrue
              54. Observation.subject
              TypeReference(JP Core Patient Profile)
              56. Observation.effective[x]
              Short測定日時
              TypedateTime, Period, Timing, instant
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              58. Observation.value[x]
              Short結果値・結果値単位
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Must Supporttrue
              60. Observation.note
              Definition

              修正情報の場合、修正事由を設定する。

              Short修正事由
              62. Observation.derivedFrom
              Definition

              例えば、患者入力フォームのデータを観察結果として反映した場合に元となるQuestionnaireResponseの識別子を設定する。

              Short観察結果の派生元
              Must Supportfalse

              Guidance on how to interpret the contents of this table can be foundhere

              0. Observation
              Definition

              患者、デバイス、またはその他の主題について行われた測定と簡単な主張。 / Measurements and simple assertions made about a patient, device or other subject.

              Short測定と簡単なアサーション / Measurements and simple assertions
              Comments

              デバイスの測定、実験室の原子結果、バイタルサイン、身長、体重、喫煙状況、コメントなどの単純な観測に使用されます。その他のリソースは、実験室レポートなどの観察のコンテキストを提供するために使用されます。 / Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

              Control0..*
              Is Modifierfalse
              Summaryfalse
              Alternate NamesVital Signs, Measurement, Results, Tests
              Invariantsdom-2: リソースが別のリソースに含まれている場合、ネストされたリソースを含めてはなりません / If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
              dom-3: リソースが別のリソースに含まれている場合、それはリソースの他の場所から参照されるか、含有リソースを参照するものとします / If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
              dom-4: リソースが別のリソースに含まれている場合、meta.versionidまたはmeta.lastupdatedを持たないものとします / If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
              dom-5: 別のリソースにリソースが含まれている場合、セキュリティラベルはありません / If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
              dom-6: リソースには、堅牢な管理のための叙述(Narative)が必要です / A resource should have narrative for robust management (text.`div`.exists())
              obs-6: databsentrasonは、観察.value [x]が存在しない場合にのみ存在するものとします / dataAbsentReason SHALL only be present if Observation.value[x] is not present (dataAbsentReason.empty() or value.empty())
              obs-7: visserveration.codeがvisserveration.component.codeと同じ場合、コードに関連付けられている値要素が存在しないでください / If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present (value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty())
              2. Observation.id
              Definition

              リソースのURLで使用されるリソースの論理ID。割り当てられたら、この値は変更されません。 / The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

              Shortこのアーティファクトの論理ID / Logical id of this artifact
              Comments

              リソースにIDがないのは、IDが作成操作を使用してサーバーに送信されている場合です。 / The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

              Control0..1
              Typeid
              Is Modifierfalse
              Summarytrue
              4. Observation.meta
              Definition

              リソースに関するメタデータ。これは、インフラストラクチャによって維持されるコンテンツです。コンテンツの変更は、常にリソースのバージョンの変更に関連付けられているとは限りません。 / The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

              Shortリソースに関するメタデータ / Metadata about the resource
              Control1..1
              TypeMeta
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              6. Observation.meta.id
              Definition

              リソース内の要素の固有ID(内部参照用)。これは、スペースを含まない任意の文字列値である可能性があります。

              Shortエレメント相互参照のためのユニークID
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              8. Observation.meta.extension
              Definition

              「要素の基本的な定義に含まれない追加情報を表すために使用されることがあります。拡張機能の使用を安全かつ管理しやすくするために、定義および使用に適用される厳格なガバナンスのセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たす必要のある要件のセットがあります。」

              Short実装によって定義される追加コンテンツ
              Comments

              どのようなアプリケーション、プロジェクト、または標準が拡張機能を使用しているかに関わらず、拡張機能の使用には決して汚名が付くわけではありません - それらを使用または定義する機関または管轄区域に関係なく。拡張機能の使用こそが、FHIR仕様を誰にとっても簡単なコアレベルで維持することを可能にします。

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: すべてのFHIR要素は、@valueまたはchildrenを持っている必要があります。 (hasValue() or (children().count() > id.count()))
              ext-1: 「拡張機能または値[x]のいずれかが必要です。両方ではありません。」 (extension.exists() != value.exists())
              SlicingThis element introduces a set of slices on Observation.meta.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ url
              • 10. Observation.meta.versionId
                Definition

                URLのバージョン部分に表示されるバージョン固有の識別子。この値は、リソースが作成、更新、または削除された場合に変更されます。

                Shortバージョン固有の識別子 (Baajon koyū no shikibetsu-shi)
                Comments

                サーバーがこの値を割り当て、クライアントが指定した値を無視する。ただし、サーバーが更新/削除時にバージョンの整合性を強制する場合を除く。

                Control0..1
                Typeid
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: すべてのFHIR要素は、@valueまたはchildrenを持っている必要があります。 (hasValue() or (children().count() > id.count()))
                12. Observation.meta.lastUpdated
                Definition

                リソースが最後に変更されたとき - 例えば、バージョンが変更されたとき。

                Short「リソースのバージョンが最後に変更されたとき」
                Comments

                この値はリソースが初めて作成される場合を除いて常に設定されています。サーバー/リソースマネージャーがこの値を設定します。クライアントが提供する値は関係ありません。これはHTTP Last-Modifiedに相当し、readのインタラクションで同じ値を持つべきです。

                Control0..1
                Typeinstant
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: すべてのFHIR要素は、@valueまたはchildrenを持っている必要があります。 (hasValue() or (children().count() > id.count()))
                14. Observation.meta.source
                Definition

                リソースのソースシステムを識別するURI。これにより、リソース内の情報のソースをトラックまたは区別するために使用できる最小限の[プロビナンス](provenance.html#)情報が提供されます。ソースは、別のFHIRサーバー、ドキュメント、メッセージ、データベースなどを識別できます。

                Short「リソースがどこから来たかを特定する」(Risōsu ga doko kara kita ka o tokutei suru)
                Comments

                「プロバナンスのリソースにおいて、これはProvenance.entity.what[x]に対応します。ソースの正確な使用方法(および含意されるProvenance.entity.role)は実装者の判断に委ねられます。指定されたソースは1つだけです。追加のプロバナンスの詳細が必要な場合は、完全なプロバナンスリソースを使用するべきです。

                この要素は、正規のURLでホストされていないリソースの現在のマスターソースがどこにあるかを示すために使用できます。」

                Control0..1
                Typeuri
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: すべてのFHIR要素は、@valueまたはchildrenを持っている必要があります。 (hasValue() or (children().count() > id.count()))
                16. Observation.meta.profile
                Definition

                このリソースが準拠すると主張する StructureDefinition リソースに関するプロファイルのリストです。URL は StructureDefinition.url への参照です。

                Shortこのリソースが適合を主張するプロファイル
                Comments

                これらの主張が時間の経過に伴って検証または更新される方法と、それらを決定するサーバーや他の基盤に任されます。プロファイルURLのリストは1セットです。

                Control1..1
                Typecanonical(StructureDefinition)
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supporttrue
                Summarytrue
                Fixed Valuehttp://e-path.jp/fhir/ePath/StructureDefinition/EPath_Observation_Execution
                Invariantsele-1: すべてのFHIR要素は、@valueまたはchildrenを持っている必要があります。 (hasValue() or (children().count() > id.count()))
                18. Observation.meta.security
                Definition

                このリソースにはセキュリティラベルが適用されています。これらのタグにより、特定のリソースが全体的なセキュリティポリシーやインフラストラクチャに関連付けられます。

                Shortこのリソースに適用されたセキュリティラベル
                Comments

                セキュリティラベルは変更せずにリソースのバージョンを更新可能です。セキュリティラベルのリストはセットであり、一意性はシステム/コードに基づき、バージョンと表示は無視されます。

                Control0..*
                BindingUnless not suitable, these codes SHALL be taken from All Security Labels
                (extensible to http://hl7.org/fhir/ValueSet/security-labels|4.0.1)

                医療プライバシーおよびセキュリティ分類システムからのセキュリティラベル。

                TypeCoding
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: すべてのFHIR要素は、@valueまたはchildrenを持っている必要があります。 (hasValue() or (children().count() > id.count()))
                20. Observation.meta.tag
                Definition

                このリソースに適用されるタグです。タグは、リソースをプロセスやワークフローに識別し、関連付けるために使用することが意図されており、アプリケーションはリソースの意味を解釈する際にタグを考慮する必要はありません。

                Shortこのリソースに適用されたタグ
                Comments

                リソースの表示バージョンを変更することなく、タグを更新できます。タグのリストは集合です。ユニーク性はシステム/コードに基づき、バージョンと表示は無視されます。

                Control0..*
                BindingFor example codes, see CommonTags
                (example to http://hl7.org/fhir/ValueSet/common-tags|4.0.1)

                「様々なタグを表すコードで、一般的にはワークフローに関連しています。

                TypeCoding
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: すべてのFHIR要素は、@valueまたはchildrenを持っている必要があります。 (hasValue() or (children().count() > id.count()))
                22. Observation.implicitRules
                Definition

                リソースが構築されたときに従った一連のルールへの参照。コンテンツの処理時に理解する必要があります。多くの場合、これは他のプロファイルなどとともに特別なルールを定義する実装ガイドへの参照です。 / A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

                Shortこのコンテンツが作成されたルールのセット / A set of rules under which this content was created
                Comments

                このルールセットを主張することは、コンテンツが限られた取引パートナーのセットによってのみ理解されることを制限します。これにより、本質的に長期的にデータの有用性が制限されます。ただし、既存の健康エコシステムは非常に破壊されており、一般的に計算可能な意味でデータを定義、収集、交換する準備ができていません。可能な限り、実装者や仕様ライターはこの要素の使用を避ける必要があります。多くの場合、使用する場合、URLは、これらの特別なルールを他のプロファイル、バリューセットなどとともに叙述(Narative)の一部として定義する実装ガイドへの参照です。 / Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

                Control0..1
                Typeuri
                Is Modifiertrue because 暗黙のルールは、意味または解釈を変更するリソースに関する追加の知識を提供する可能性があるため、この要素は修飾子としてラベル付けされています。 / This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                24. Observation.language
                Definition

                リソースが書かれている基本言語。 / The base language in which the resource is written.

                Shortリソースコンテンツの言語 / Language of the resource content
                Comments

                言語は、インデックス作成とアクセシビリティをサポートするために提供されます(通常、テキストから音声までのサービスなどのサービスが言語タグを使用します)。叙述(Narative)のHTML言語タグは、叙述(Narative)に適用されます。リソース上の言語タグを使用して、リソース内のデータから生成された他のプレゼンテーションの言語を指定できます。すべてのコンテンツが基本言語である必要はありません。リソース。言語は、叙述(Narative)に自動的に適用されると想定されるべきではありません。言語が指定されている場合、HTMLのDIV要素にも指定されている場合(XML:LangとHTML Lang属性の関係については、HTML5のルールを参照してください)。 / Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

                Control0..1
                BindingThe codes SHOULD be taken from CommonLanguages
                (preferred to http://hl7.org/fhir/ValueSet/languages|4.0.1)

                人間の言語。 / A human language.

                Additional BindingsPurpose
                AllLanguagesMax Binding
                Typecode
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summaryfalse
                Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                26. Observation.text
                Definition

                リソースの概要を含み、人間へのリソースの内容を表すために使用できる人間の読み取り可能な叙述(Narative)。叙述(Narative)はすべての構造化されたデータをエンコードする必要はありませんが、人間が叙述(Narative)を読むだけで「臨床的に安全」にするために十分な詳細を含める必要があります。リソースの定義は、臨床的安全を確保するために、叙述(Narative)で表現するコンテンツを定義する場合があります。 / A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

                Short人間の解釈のためのリソースのテキスト概要 / Text summary of the resource, for human interpretation
                Comments

                含まれるリソースには叙述(Narative)がありません。含まれていないリソースには叙述(Narative)が必要です。場合によっては、リソースには、追加の個別のデータがほとんどまたはまったくないテキストのみがあります(すべてのMinoccur = 1要素が満たされている限り)。これは、情報がtext blob (バイナリー ラージ オブジェクト)としてキャプチャされるレガシーシステムからのデータ、またはテキストが生またはナレーションされ、エンコードされた情報が後で追加される場合に必要になる場合があります。 / Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

                Control0..1
                TypeNarrative
                Is Modifierfalse
                Summaryfalse
                Alternate Namesnarrative, html, xhtml, display
                Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                28. Observation.contained
                Definition

                これらのリソースには、それらを含むリソースを除いて独立した存在はありません - 独立して特定することはできず、独自の独立したトランザクションスコープを持つこともできません。 / These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

                Shortインラインリソースが含まれています / Contained, inline Resources
                Comments

                識別が失われると、コンテンツを適切に識別できる場合は、これを行うべきではありません。含まれるリソースには、メタ要素にプロファイルとタグがある場合がありますが、セキュリティラベルはありません。 / This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

                Control0..*
                TypeResource
                Is Modifierfalse
                Summaryfalse
                Alternate Namesinline resources, anonymous resources, contained resources
                30. Observation.extension
                Definition

                リソースの基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                Short実装で定義された追加のコンテンツ / Additional content defined by implementations
                Comments

                拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
                32. Observation.modifierExtension
                Definition

                リソースの基本的な定義の一部ではなく、それを含む要素の理解および/または含有要素の子孫の理解を変更するために使用される場合があります。通常、修飾子要素は否定または資格を提供します。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義することが許可されていますが、拡張機能の定義の一部として満たされる一連の要件があります。アプリケーションの処理リソースは、修飾子拡張機能をチェックする必要があります。

                モディファイア拡張は、リソースまたはdomainResource上の要素の意味を変更してはなりません(修飾軸自体の意味を変更することはできません)。 / May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                Short無視できない拡張機能 / Extensions that cannot be ignored
                Comments

                拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because モディファイア拡張は、それらを含むリソースの意味または解釈を変更することが期待されています / Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
                Summaryfalse
                Requirements

                修飾子拡張機能により、安全に無視できる大部分の拡張機能と明確に区別できるように、安全に無視できない拡張機能が可能になります。これにより、実装者が拡張の存在を禁止する必要性を排除することにより、相互運用性が促進されます。詳細については、[修飾子拡張の定義](拡張性.html#modifierextension)を参照してください。 / Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content
                Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
                34. Observation.identifier
                Definition

                この観察に割り当てられた一意の識別子。 / A unique identifier assigned to this observation.

                Short観察のためのビジネス識別子 / Business Identifier for observation
                NoteThis is a business identifier, not a resource identifier (see discussion)
                Control0..*
                TypeIdentifier
                Is Modifierfalse
                Summarytrue
                Requirements

                観測を区別し、参照することを可能にします。 / Allows observations to be distinguished and referenced.

                Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                SlicingThis element introduces a set of slices on Observation.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • value @ system
                • 36. Observation.identifier:resourceInstanceIdentifier
                  Slice NameresourceInstanceIdentifier
                  Definition

                  この観察に割り当てられた一意の識別子。 / A unique identifier assigned to this observation.

                  Shortリソースインスタンス識別子
                  NoteThis is a business identifier, not a resource identifier (see discussion)
                  Control0..1
                  TypeIdentifier
                  Is Modifierfalse
                  Must Supportfalse
                  Summarytrue
                  Requirements

                  観測を区別し、参照することを可能にします。 / Allows observations to be distinguished and referenced.

                  Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  38. Observation.identifier:resourceInstanceIdentifier.id
                  Definition

                  リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  Short要素間参照のための一意のID / Unique id for inter-element referencing
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  40. Observation.identifier:resourceInstanceIdentifier.extension
                  Definition

                  要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  Short実装で定義された追加のコンテンツ / Additional content defined by implementations
                  Comments

                  拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Alternate Namesextensions, user content
                  Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  SlicingThis element introduces a set of slices on Observation.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                  • value @ url
                  • 42. Observation.identifier:resourceInstanceIdentifier.use
                    Definition

                    この識別子の目的。 / The purpose of this identifier.

                    Short通常|公式|温度|セカンダリ|古い(知られている場合) / usual | official | temp | secondary | old (If known)
                    Comments

                    アプリケーションは、識別子が一時的なものであると明示的に言っていない限り、永続的であると想定できます。 / Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

                    Control0..1
                    BindingThe codes SHALL be taken from IdentifierUse
                    (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

                    既知の場合、この識別子の目的を識別します。 / Identifies the purpose for this identifier, if known .

                    Typecode
                    Is Modifiertrue because これは、アプリケーションが一時的なIDを永続的なIDと間違えてはならないため、「IS修飾子」とラベル付けされています。 / This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Requirements

                    特定の使用のコンテキストが一連の識別子の中から選択される適切な識別子を許可します。 / Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    44. Observation.identifier:resourceInstanceIdentifier.type
                    Definition

                    特定の目的に使用する識別子を決定するために使用できる識別子のコード化されたタイプ。 / A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

                    Short識別子の説明 / Description of identifier
                    Comments

                    この要素は、識別子の一般的なカテゴリのみを扱います。識別子。システムに対応するコードに使用しないでください。一部の識別子は、一般的な使用法により複数のカテゴリに分類される場合があります。システムがわかっている場合、タイプは常にシステム定義の一部であるため、タイプは不要です。ただし、システムが不明な識別子を処理する必要があることがよくあります。多くの異なるシステムが同じタイプを持っているため、タイプとシステムの間に1:1の関係はありません。 / This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

                    Control0..1
                    BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
                    (extensible to http://hl7.org/fhir/ValueSet/identifier-type|4.0.1)

                    特定の目的に使用する識別子を決定するために使用できる識別子のコード化されたタイプ。 / A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summarytrue
                    Requirements

                    識別子システムが不明な場合、ユーザーは識別子を使用できます。 / Allows users to make use of identifiers when the identifier system is not known.

                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    46. Observation.identifier:resourceInstanceIdentifier.system
                    Definition

                    値の名前空間、つまり一意のセット値を記述するURLを確立します。 / Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

                    Short識別子値の名前空間 / The namespace for the identifier value
                    Comments

                    識別子。システムは常にケースに敏感です。 / Identifier.system is always case sensitive.

                    Control1..1
                    Typeuri
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Requirements

                    識別子のセットがたくさんあります。2つの識別子を一致させるには、どのセットを扱っているかを知る必要があります。システムは、特定の一意の識別子セットを識別します。 / There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

                    Fixed Valuehttp://e-path.jp/fhir/ePath/IdSystem/resourceInstance-identifier
                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    48. Observation.identifier:resourceInstanceIdentifier.value
                    Definition

                    通常、識別子の部分はユーザーに関連し、システムのコンテキスト内で一意のユーザーに関連しています。 / The portion of the identifier typically relevant to the user and which is unique within the context of the system.

                    Short一意の値 / The value that is unique
                    Comments

                    値が完全なURIの場合、システムはurn:ietf:rfc:3986でなければなりません。値の主な目的は、計算マッピングです。その結果、比較目的で正規化される可能性があります(例えば、有意でない白文字、ダッシュなどの削除)ヒューマンディスプレイ用の値は、[レンダリングされた値拡張](拡張レンダリングValue.html)を使用して伝達できます。識別子。価値は、識別子の知識を使用しない限り、ケースに敏感なものとして扱われます。システムにより、プロセッサーは、非セイズに固有の処理が安全であると確信できます。 / If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

                    Control1..1
                    Typestring
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    50. Observation.identifier:resourceInstanceIdentifier.period
                    Definition

                    識別子が使用される/有効な期間。 / Time period during which identifier is/was valid for use.

                    ShortIDが使用に有効だった時間期間 / Time period when id is/was valid for use
                    Control0..1
                    TypePeriod
                    Is Modifierfalse
                    Summarytrue
                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    52. Observation.identifier:resourceInstanceIdentifier.assigner
                    Definition

                    識別子を発行/管理する組織。 / Organization that issued/manages the identifier.

                    ShortIDを発行した組織(単なるテキストである可能性があります) / Organization that issued id (may be just text)
                    Comments

                    識別子は、.reference要素を省略し、割り当て組織に関する名前またはその他のテキスト情報を反映した.display要素のみを含む場合があります。 / The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

                    Control0..1
                    TypeReference(Organization)
                    Is Modifierfalse
                    Summarytrue
                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    54. Observation.identifier:questionnaireLinkId
                    Slice NamequestionnaireLinkId
                    Definition

                    deriverFrom に QuestionnaireResponse が指定されている場合、その入力コントロールに対応するlinkIdを指定する。

                    Short質問回答のリンクID
                    NoteThis is a business identifier, not a resource identifier (see discussion)
                    Control0..1
                    TypeIdentifier
                    Is Modifierfalse
                    Summarytrue
                    Requirements

                    観測を区別し、参照することを可能にします。 / Allows observations to be distinguished and referenced.

                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    56. Observation.identifier:questionnaireLinkId.id
                    Definition

                    リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    Short要素間参照のための一意のID / Unique id for inter-element referencing
                    Control0..1
                    Typestring
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    58. Observation.identifier:questionnaireLinkId.extension
                    Definition

                    要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    Short実装で定義された追加のコンテンツ / Additional content defined by implementations
                    Comments

                    拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesextensions, user content
                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    SlicingThis element introduces a set of slices on Observation.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                    • value @ url
                    • 60. Observation.identifier:questionnaireLinkId.use
                      Definition

                      この識別子の目的。 / The purpose of this identifier.

                      Short通常|公式|温度|セカンダリ|古い(知られている場合) / usual | official | temp | secondary | old (If known)
                      Comments

                      アプリケーションは、識別子が一時的なものであると明示的に言っていない限り、永続的であると想定できます。 / Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

                      Control0..1
                      BindingThe codes SHALL be taken from IdentifierUse
                      (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

                      既知の場合、この識別子の目的を識別します。 / Identifies the purpose for this identifier, if known .

                      Typecode
                      Is Modifiertrue because これは、アプリケーションが一時的なIDを永続的なIDと間違えてはならないため、「IS修飾子」とラベル付けされています。 / This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Requirements

                      特定の使用のコンテキストが一連の識別子の中から選択される適切な識別子を許可します。 / Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

                      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      62. Observation.identifier:questionnaireLinkId.type
                      Definition

                      特定の目的に使用する識別子を決定するために使用できる識別子のコード化されたタイプ。 / A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

                      Short識別子の説明 / Description of identifier
                      Comments

                      この要素は、識別子の一般的なカテゴリのみを扱います。識別子。システムに対応するコードに使用しないでください。一部の識別子は、一般的な使用法により複数のカテゴリに分類される場合があります。システムがわかっている場合、タイプは常にシステム定義の一部であるため、タイプは不要です。ただし、システムが不明な識別子を処理する必要があることがよくあります。多くの異なるシステムが同じタイプを持っているため、タイプとシステムの間に1:1の関係はありません。 / This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

                      Control0..1
                      BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
                      (extensible to http://hl7.org/fhir/ValueSet/identifier-type|4.0.1)

                      特定の目的に使用する識別子を決定するために使用できる識別子のコード化されたタイプ。 / A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Summarytrue
                      Requirements

                      識別子システムが不明な場合、ユーザーは識別子を使用できます。 / Allows users to make use of identifiers when the identifier system is not known.

                      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      64. Observation.identifier:questionnaireLinkId.system
                      Definition

                      値の名前空間、つまり一意のセット値を記述するURLを確立します。 / Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

                      Short識別子値の名前空間 / The namespace for the identifier value
                      Comments

                      識別子。システムは常にケースに敏感です。 / Identifier.system is always case sensitive.

                      Control1..1
                      Typeuri
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Requirements

                      識別子のセットがたくさんあります。2つの識別子を一致させるには、どのセットを扱っているかを知る必要があります。システムは、特定の一意の識別子セットを識別します。 / There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

                      Fixed Valuehttp://e-path.jp/fhir/ePath/IdSystem/questionnaireResponse-linkId
                      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      66. Observation.identifier:questionnaireLinkId.value
                      Definition

                      通常、識別子の部分はユーザーに関連し、システムのコンテキスト内で一意のユーザーに関連しています。 / The portion of the identifier typically relevant to the user and which is unique within the context of the system.

                      Short一意の値 / The value that is unique
                      Comments

                      値が完全なURIの場合、システムはurn:ietf:rfc:3986でなければなりません。値の主な目的は、計算マッピングです。その結果、比較目的で正規化される可能性があります(例えば、有意でない白文字、ダッシュなどの削除)ヒューマンディスプレイ用の値は、[レンダリングされた値拡張](拡張レンダリングValue.html)を使用して伝達できます。識別子。価値は、識別子の知識を使用しない限り、ケースに敏感なものとして扱われます。システムにより、プロセッサーは、非セイズに固有の処理が安全であると確信できます。 / If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

                      Control1..1
                      Typestring
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      68. Observation.identifier:questionnaireLinkId.period
                      Definition

                      識別子が使用される/有効な期間。 / Time period during which identifier is/was valid for use.

                      ShortIDが使用に有効だった時間期間 / Time period when id is/was valid for use
                      Control0..1
                      TypePeriod
                      Is Modifierfalse
                      Summarytrue
                      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      70. Observation.identifier:questionnaireLinkId.assigner
                      Definition

                      識別子を発行/管理する組織。 / Organization that issued/manages the identifier.

                      ShortIDを発行した組織(単なるテキストである可能性があります) / Organization that issued id (may be just text)
                      Comments

                      識別子は、.reference要素を省略し、割り当て組織に関する名前またはその他のテキスト情報を反映した.display要素のみを含む場合があります。 / The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

                      Control0..1
                      TypeReference(Organization)
                      Is Modifierfalse
                      Summarytrue
                      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      72. Observation.basedOn
                      Definition

                      このイベントによって全体または一部に満たされる計画、提案、または命令。たとえば、薬物療法では、患者が分配される前に臨床検査を実施する必要がある場合があります。 / A plan, proposal or order that is fulfilled in whole or in part by this event. For example, a MedicationRequest may require a patient to have laboratory test performed before it is dispensed.

                      Short計画、提案、または命令を満たします / Fulfills plan, proposal or order
                      Control0..*
                      TypeReference(CarePlan, DeviceRequest, ImmunizationRecommendation, MedicationRequest, NutritionOrder, ServiceRequest)
                      Is Modifierfalse
                      Summarytrue
                      Requirements

                      イベントの許可を追跡し、提案/勧告が行われたかどうかを追跡することができます。 / Allows tracing of authorization for the event and tracking whether proposals/recommendations were acted upon.

                      Alternate NamesFulfills
                      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      74. Observation.partOf
                      Definition

                      この特定の観察結果がコンポーネントまたはステップであるより大きなイベント。たとえば、手順の一部としての観察。 / A larger event of which this particular Observation is a component or step. For example, an observation as part of a procedure.

                      Short参照イベントの一部 / Part of referenced event
                      Comments

                      観察をEncounterにリンクするには、「Encounter」を使用します。別の観察を参照するためのガイダンスについては、以下の[注](obervation.html#obsgrouping)を参照してください。 / To link an Observation to an Encounter use encounter. See the Notes below for guidance on referencing another Observation.

                      Control0..*
                      TypeReference(MedicationAdministration, MedicationDispense, MedicationStatement, Procedure, Immunization, ImagingStudy)
                      Is Modifierfalse
                      Summarytrue
                      Alternate NamesContainer
                      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      76. Observation.status
                      Definition

                      実施情報の場合、finalを設定する。修正情報の場合、cancelledを設定する。

                      Short登録|予備|ファイナル|修正 + / registered | preliminary | final | amended +
                      Comments

                      この要素は、リソースを現在有効ではないとマークするコードが含まれているため、修飾子としてラベル付けされています。 / This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

                      Control1..1
                      BindingThe codes SHALL be taken from ObservationStatus
                      (required to http://hl7.org/fhir/ValueSet/observation-status|4.0.1)

                      観察のステータスを提供するコード。 / Codes providing the status of an observation.

                      Typecode
                      Is Modifiertrue because この要素は、リソースを有効として扱うべきではないことを意味するステータスに入力されたステータスを含むステータス要素であるため、修飾子としてラベル付けされています。 / This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supporttrue
                      Summarytrue
                      Requirements

                      個々の結果のステータスを追跡する必要があります。レポート全体が最終決定される前に、いくつかの結果が確定します。 / Need to track the status of individual results. Some results are finalized before the whole report is finalized.

                      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      78. Observation.category
                      Definition

                      行われている一般的なタイプの観測を分類するコード。 / A code that classifies the general type of observation being made.

                      Short観察の種類の分類 / Classification of type of observation
                      Comments

                      必要なカテゴリバリューセットに加えて、この要素は、所有者のカテゴリの定義に基づいてさまざまな分類スキームを許可し、効果的に複数のカテゴリを一度に使用できます。粒度のレベルは、値セットのカテゴリの概念によって定義されます。 / In addition to the required category valueset, this element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used at once. The level of granularity is defined by the category concepts in the value set.

                      Control0..*
                      BindingThe codes SHOULD be taken from ObservationCategoryCodes
                      (preferred to http://hl7.org/fhir/ValueSet/observation-category|4.0.1)

                      高レベルの観測カテゴリのコード。 / Codes for high level observation categories.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Summaryfalse
                      Requirements

                      どの観測値が取得されて表示されるかをフィルタリングするために使用されます。 / Used for filtering what observations are retrieved and displayed.

                      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      SlicingThis element introduces a set of slices on Observation.category. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                      • value @ coding.system
                      • 80. Observation.category:BOMAssessmentCategory
                        Slice NameBOMAssessmentCategory
                        Definition

                        BOM観察項目分類コード・名称 「BOM観察項目分類コード」より設定する。

                        ShortBOM観察項目分類コード・名称
                        Comments

                        必要なカテゴリバリューセットに加えて、この要素は、所有者のカテゴリの定義に基づいてさまざまな分類スキームを許可し、効果的に複数のカテゴリを一度に使用できます。粒度のレベルは、値セットのカテゴリの概念によって定義されます。 / In addition to the required category valueset, this element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used at once. The level of granularity is defined by the category concepts in the value set.

                        Control0..*
                        BindingThe codes SHOULD be taken from ObservationCategoryCodes
                        (preferred to http://hl7.org/fhir/ValueSet/observation-category|4.0.1)

                        高レベルの観測カテゴリのコード。 / Codes for high level observation categories.

                        TypeCodeableConcept
                        Is Modifierfalse
                        Must Supportfalse
                        Summaryfalse
                        Requirements

                        どの観測値が取得されて表示されるかをフィルタリングするために使用されます。 / Used for filtering what observations are retrieved and displayed.

                        Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        82. Observation.category:BOMAssessmentCategory.id
                        Definition

                        リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                        Short要素間参照のための一意のID / Unique id for inter-element referencing
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        84. Observation.category:BOMAssessmentCategory.extension
                        Definition

                        要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                        Short実装で定義された追加のコンテンツ / Additional content defined by implementations
                        Comments

                        拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifierfalse
                        Summaryfalse
                        Alternate Namesextensions, user content
                        Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        SlicingThis element introduces a set of slices on Observation.category.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                        • value @ url
                        • 86. Observation.category:BOMAssessmentCategory.coding
                          Definition

                          用語システムによって定義されたコードへの参照。 / A reference to a code defined by a terminology system.

                          Short用語システムによって定義されたコード / Code defined by a terminology system
                          Comments

                          コードは、列挙されたCTなどの非常に正式な定義まで、列挙またはコードリストで非常にさりげなく定義される場合があります。詳細については、HL7 V3コアプリンシップを参照してください。コーディングの順序付けは未定義であり、意味を推測するために使用されません。一般に、せいぜい、コーディング値の1つのみがuserselected = trueとしてラベル付けされます。 / Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                          Control0..*
                          BindingThe codes SHOULD be taken from EPath_AssessmentCategory_VS
                          (preferred to http://e-path.jp/fhir/ePath/ValueSet/EPath_AssessmentCategory_VS)
                          TypeCoding
                          Is Modifierfalse
                          Summarytrue
                          Requirements

                          コードシステム内の代替エンコーディング、および他のコードシステムへの翻訳が可能になります。 / Allows for alternative encodings within a code system, and translations to other code systems.

                          Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          88. Observation.category:BOMAssessmentCategory.coding.id
                          Definition

                          リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                          Short要素間参照のための一意のID / Unique id for inter-element referencing
                          Control0..1
                          Typestring
                          Is Modifierfalse
                          XML FormatIn the XML format, this property is represented as an attribute.
                          Summaryfalse
                          90. Observation.category:BOMAssessmentCategory.coding.extension
                          Definition

                          要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                          Short実装で定義された追加のコンテンツ / Additional content defined by implementations
                          Comments

                          拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifierfalse
                          Summaryfalse
                          Alternate Namesextensions, user content
                          Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          SlicingThis element introduces a set of slices on Observation.category.coding.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                          • value @ url
                          • 92. Observation.category:BOMAssessmentCategory.coding.system
                            Definition

                            コード内のシンボルの意味を定義するコードシステムの識別。 / The identification of the code system that defines the meaning of the symbol in the code.

                            Short用語システムのアイデンティティ / Identity of the terminology system
                            Comments

                            uriは、oid(urn:oid:...)またはuuid(urn:uuid:...)である場合があります。OIDとUUIDは、HL7 OIDレジストリへの参照となります。それ以外の場合、URIは、FHIRの特別なURIを定義したHL7のリストから来るか、システムを明確かつ明確に確立する定義を参照する必要があります。 / The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

                            Control1..1
                            Typeuri
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Must Supporttrue
                            Summarytrue
                            Requirements

                            シンボルの定義のソースについて明確である必要があります。 / Need to be unambiguous about the source of the definition of the symbol.

                            Fixed Valueurn:oid:1.2.392.200250.3.2.200.40
                            Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            94. Observation.category:BOMAssessmentCategory.coding.version
                            Definition

                            このコードを選択するときに使用されたコードシステムのバージョン。コードの意味がバージョン全体で一貫しているため、適切にメンテナンスしたコードシステムでは報告されたバージョンを必要としないことに注意してください。ただし、これは一貫して保証することはできず、意味が一貫していることが保証されていない場合、バージョンを交換する必要があります。 / The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

                            Shortシステムのバージョン - 関連する場合 / Version of the system - if relevant
                            Comments

                            用語がコードシステムバージョンを識別するために使用する文字列を明確に定義していない場合、推奨は、そのバージョンがバージョンの日付として公式に公開された日付(FHIR日付形式で表現)を使用することです。 / Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

                            NoteThis is a business version Id, not a resource version Id (see discussion)
                            Control0..1
                            Typestring
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Summarytrue
                            Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            96. Observation.category:BOMAssessmentCategory.coding.code
                            Definition

                            システムによって定義された構文のシンボル。シンボルは、定義されたコードまたはコーディングシステムによって定義された構文の式(例:調整後)である場合があります。 / A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

                            Shortシステムによって定義された構文のシンボル / Symbol in syntax defined by the system
                            Control1..1
                            Typecode
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Must Supporttrue
                            Summarytrue
                            Requirements

                            システム内の特定のコードを参照する必要があります。 / Need to refer to a particular code in the system.

                            Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            98. Observation.category:BOMAssessmentCategory.coding.display
                            Definition

                            システムのルールに従って、システム内のコードの意味の表現。 / A representation of the meaning of the code in the system, following the rules of the system.

                            Shortシステムによって定義された表現 / Representation defined by the system
                            Control1..1
                            Typestring
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Must Supporttrue
                            Summarytrue
                            Requirements

                            システムを知らない読者のために、コードの人間の読み取り可能な意味を持ち込むことができる必要があります。 / Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

                            Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            100. Observation.category:BOMAssessmentCategory.coding.userSelected
                            Definition

                            このコーディングがユーザーによって直接選択されたことを示します。利用可能なアイテムのピックリスト(コードまたはディスプレイ)。 / Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

                            Shortこのコーディングがユーザーによって直接選択された場合 / If this coding was chosen directly by the user
                            Comments

                            一連の代替案の中で、直接選択されたコードが新しい翻訳の最も適切な出発点です。この要素の使用とその結果をより完全に明確にするためには、「直接選択された」ことについては曖昧さがあり、取引パートナー契約が必要になる場合があります。 / Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

                            Control0..1
                            Typeboolean
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Summarytrue
                            Requirements

                            これは、臨床安全基準として特定されています - この正確なシステム/コードペアは、いくつかのルールまたは言語処理に基づいてシステムによって推測されるのではなく、明示的に選択されたことです。 / This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

                            Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            102. Observation.category:BOMAssessmentCategory.text
                            Definition

                            データを入力したユーザー、および/またはユーザーの意図された意味を表すユーザーによって見られる/選択/発言された概念の人間の言語表現。 / A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                            Shortコンセプトの単純なテキスト表現 / Plain text representation of the concept
                            Comments

                            多くの場合、テキストはコーディングの1つの表示名と同じです。 / Very often the text is the same as a displayName of one of the codings.

                            Control0..1
                            Typestring
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Summarytrue
                            Requirements

                            用語からのコードは、それらを使用する人間のすべてのニュアンスを使用して、常に正しい意味をキャプチャするとは限りません。または、適切なコードがまったくない場合があります。これらの場合、テキストはソースの完全な意味をキャプチャするために使用されます。 / The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                            Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            104. Observation.code
                            Definition

                            観察されたものについて説明します。時々、これは観察「名前」と呼ばれます。 / Describes what was observed. Sometimes this is called the observation "name".

                            Short観察項目コード
                            Comments

                            すべて code-valueおよび存在する場合、component.code-component.valueペアを考慮する必要があります。観察の意味を正しく理解する必要があります。 / All code-value and, if present, component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

                            Control1..1
                            BindingFor example codes, see LOINCCodes
                            (example to http://hl7.org/fhir/ValueSet/observation-codes)

                            観察項目コード

                            TypeCodeableConcept
                            Is Modifierfalse
                            Must Supporttrue
                            Summarytrue
                            Requirements

                            どのような観察が行われているかを知ることは、観察を理解するために不可欠です。 / Knowing what kind of observation is being made is essential to understanding the observation.

                            Alternate NamesName
                            Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            106. Observation.code.id
                            Definition

                            リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                            Short要素間参照のための一意のID / Unique id for inter-element referencing
                            Control0..1
                            Typestring
                            Is Modifierfalse
                            XML FormatIn the XML format, this property is represented as an attribute.
                            Summaryfalse
                            108. Observation.code.extension
                            Definition

                            要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                            Short実装で定義された追加のコンテンツ / Additional content defined by implementations
                            Comments

                            拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                            Control0..*
                            TypeExtension
                            Is Modifierfalse
                            Summaryfalse
                            Alternate Namesextensions, user content
                            Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
                            SlicingThis element introduces a set of slices on Observation.code.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                            • value @ url
                            • 110. Observation.code.coding
                              Definition

                              用語システムによって定義されたコードへの参照。 / A reference to a code defined by a terminology system.

                              Short用語システムによって定義されたコード / Code defined by a terminology system
                              Comments

                              コードは、列挙されたCTなどの非常に正式な定義まで、列挙またはコードリストで非常にさりげなく定義される場合があります。詳細については、HL7 V3コアプリンシップを参照してください。コーディングの順序付けは未定義であり、意味を推測するために使用されません。一般に、せいぜい、コーディング値の1つのみがuserselected = trueとしてラベル付けされます。 / Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                              Control0..*
                              TypeCoding
                              Is Modifierfalse
                              Summarytrue
                              Requirements

                              コードシステム内の代替エンコーディング、および他のコードシステムへの翻訳が可能になります。 / Allows for alternative encodings within a code system, and translations to other code systems.

                              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              SlicingThis element introduces a set of slices on Observation.code.coding. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                              • value @ system
                              • 112. Observation.code.coding:BOMAssessmentCode
                                Slice NameBOMAssessmentCode
                                Definition

                                BOM観察項目コード・名称 「BOM観察項目コード」より設定する。

                                ShortBOM観察項目分類コード・名称
                                Comments

                                コードは、列挙されたCTなどの非常に正式な定義まで、列挙またはコードリストで非常にさりげなく定義される場合があります。詳細については、HL7 V3コアプリンシップを参照してください。コーディングの順序付けは未定義であり、意味を推測するために使用されません。一般に、せいぜい、コーディング値の1つのみがuserselected = trueとしてラベル付けされます。 / Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                                Control0..1
                                BindingThe codes SHOULD be taken from EPath_AssessmentCode_VS
                                (preferred to http://e-path.jp/fhir/ePath/ValueSet/EPath_AssessmentCode_VS)
                                TypeCoding
                                Is Modifierfalse
                                Summarytrue
                                Requirements

                                コードシステム内の代替エンコーディング、および他のコードシステムへの翻訳が可能になります。 / Allows for alternative encodings within a code system, and translations to other code systems.

                                Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                114. Observation.code.coding:BOMAssessmentCode.id
                                Definition

                                リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                Short要素間参照のための一意のID / Unique id for inter-element referencing
                                Control0..1
                                Typestring
                                Is Modifierfalse
                                XML FormatIn the XML format, this property is represented as an attribute.
                                Summaryfalse
                                116. Observation.code.coding:BOMAssessmentCode.extension
                                Definition

                                要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                Short実装で定義された追加のコンテンツ / Additional content defined by implementations
                                Comments

                                拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifierfalse
                                Summaryfalse
                                Alternate Namesextensions, user content
                                Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                SlicingThis element introduces a set of slices on Observation.code.coding.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                • value @ url
                                • 118. Observation.code.coding:BOMAssessmentCode.system
                                  Definition

                                  コード内のシンボルの意味を定義するコードシステムの識別。 / The identification of the code system that defines the meaning of the symbol in the code.

                                  Short用語システムのアイデンティティ / Identity of the terminology system
                                  Comments

                                  uriは、oid(urn:oid:...)またはuuid(urn:uuid:...)である場合があります。OIDとUUIDは、HL7 OIDレジストリへの参照となります。それ以外の場合、URIは、FHIRの特別なURIを定義したHL7のリストから来るか、システムを明確かつ明確に確立する定義を参照する必要があります。 / The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

                                  Control1..1
                                  Typeuri
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Must Supporttrue
                                  Summarytrue
                                  Requirements

                                  シンボルの定義のソースについて明確である必要があります。 / Need to be unambiguous about the source of the definition of the symbol.

                                  Fixed Valueurn:oid:1.2.392.200250.3.2.200.50
                                  Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  120. Observation.code.coding:BOMAssessmentCode.version
                                  Definition

                                  このコードを選択するときに使用されたコードシステムのバージョン。コードの意味がバージョン全体で一貫しているため、適切にメンテナンスしたコードシステムでは報告されたバージョンを必要としないことに注意してください。ただし、これは一貫して保証することはできず、意味が一貫していることが保証されていない場合、バージョンを交換する必要があります。 / The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

                                  Shortシステムのバージョン - 関連する場合 / Version of the system - if relevant
                                  Comments

                                  用語がコードシステムバージョンを識別するために使用する文字列を明確に定義していない場合、推奨は、そのバージョンがバージョンの日付として公式に公開された日付(FHIR日付形式で表現)を使用することです。 / Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

                                  NoteThis is a business version Id, not a resource version Id (see discussion)
                                  Control0..1
                                  Typestring
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Summarytrue
                                  Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  122. Observation.code.coding:BOMAssessmentCode.code
                                  Definition

                                  システムによって定義された構文のシンボル。シンボルは、定義されたコードまたはコーディングシステムによって定義された構文の式(例:調整後)である場合があります。 / A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

                                  Shortシステムによって定義された構文のシンボル / Symbol in syntax defined by the system
                                  Control1..1
                                  Typecode
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Must Supporttrue
                                  Summarytrue
                                  Requirements

                                  システム内の特定のコードを参照する必要があります。 / Need to refer to a particular code in the system.

                                  Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  124. Observation.code.coding:BOMAssessmentCode.display
                                  Definition

                                  システムのルールに従って、システム内のコードの意味の表現。 / A representation of the meaning of the code in the system, following the rules of the system.

                                  Shortシステムによって定義された表現 / Representation defined by the system
                                  Control1..1
                                  Typestring
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Must Supporttrue
                                  Summarytrue
                                  Requirements

                                  システムを知らない読者のために、コードの人間の読み取り可能な意味を持ち込むことができる必要があります。 / Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

                                  Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  126. Observation.code.coding:BOMAssessmentCode.userSelected
                                  Definition

                                  このコーディングがユーザーによって直接選択されたことを示します。利用可能なアイテムのピックリスト(コードまたはディスプレイ)。 / Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

                                  Shortこのコーディングがユーザーによって直接選択された場合 / If this coding was chosen directly by the user
                                  Comments

                                  一連の代替案の中で、直接選択されたコードが新しい翻訳の最も適切な出発点です。この要素の使用とその結果をより完全に明確にするためには、「直接選択された」ことについては曖昧さがあり、取引パートナー契約が必要になる場合があります。 / Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

                                  Control0..1
                                  Typeboolean
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Summarytrue
                                  Requirements

                                  これは、臨床安全基準として特定されています - この正確なシステム/コードペアは、いくつかのルールまたは言語処理に基づいてシステムによって推測されるのではなく、明示的に選択されたことです。 / This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

                                  Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  128. Observation.code.coding:LocalAssessmentCode
                                  Slice NameLocalAssessmentCode
                                  Definition

                                  用語システムによって定義されたコードへの参照。 / A reference to a code defined by a terminology system.

                                  Short観察項目コード・名称
                                  Comments

                                  コードは、列挙されたCTなどの非常に正式な定義まで、列挙またはコードリストで非常にさりげなく定義される場合があります。詳細については、HL7 V3コアプリンシップを参照してください。コーディングの順序付けは未定義であり、意味を推測するために使用されません。一般に、せいぜい、コーディング値の1つのみがuserselected = trueとしてラベル付けされます。 / Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                                  Control0..1
                                  TypeCoding
                                  Is Modifierfalse
                                  Summarytrue
                                  Requirements

                                  コードシステム内の代替エンコーディング、および他のコードシステムへの翻訳が可能になります。 / Allows for alternative encodings within a code system, and translations to other code systems.

                                  Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  130. Observation.code.coding:LocalAssessmentCode.id
                                  Definition

                                  リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                  Short要素間参照のための一意のID / Unique id for inter-element referencing
                                  Control0..1
                                  Typestring
                                  Is Modifierfalse
                                  XML FormatIn the XML format, this property is represented as an attribute.
                                  Summaryfalse
                                  132. Observation.code.coding:LocalAssessmentCode.extension
                                  Definition

                                  要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                  Short実装で定義された追加のコンテンツ / Additional content defined by implementations
                                  Comments

                                  拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                  Control0..*
                                  TypeExtension
                                  Is Modifierfalse
                                  Summaryfalse
                                  Alternate Namesextensions, user content
                                  Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                  SlicingThis element introduces a set of slices on Observation.code.coding.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                  • value @ url
                                  • 134. Observation.code.coding:LocalAssessmentCode.system
                                    Definition

                                    コード内のシンボルの意味を定義するコードシステムの識別。 / The identification of the code system that defines the meaning of the symbol in the code.

                                    Short用語システムのアイデンティティ / Identity of the terminology system
                                    Comments

                                    uriは、oid(urn:oid:...)またはuuid(urn:uuid:...)である場合があります。OIDとUUIDは、HL7 OIDレジストリへの参照となります。それ以外の場合、URIは、FHIRの特別なURIを定義したHL7のリストから来るか、システムを明確かつ明確に確立する定義を参照する必要があります。 / The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

                                    Control1..1
                                    Typeuri
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Must Supporttrue
                                    Summarytrue
                                    Requirements

                                    シンボルの定義のソースについて明確である必要があります。 / Need to be unambiguous about the source of the definition of the symbol.

                                    Fixed Valuehttp://e-path.jp/fhir/ePath/CodeSystem/EPath_LocalAssessmentCode_CS"
                                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    136. Observation.code.coding:LocalAssessmentCode.version
                                    Definition

                                    このコードを選択するときに使用されたコードシステムのバージョン。コードの意味がバージョン全体で一貫しているため、適切にメンテナンスしたコードシステムでは報告されたバージョンを必要としないことに注意してください。ただし、これは一貫して保証することはできず、意味が一貫していることが保証されていない場合、バージョンを交換する必要があります。 / The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

                                    Shortシステムのバージョン - 関連する場合 / Version of the system - if relevant
                                    Comments

                                    用語がコードシステムバージョンを識別するために使用する文字列を明確に定義していない場合、推奨は、そのバージョンがバージョンの日付として公式に公開された日付(FHIR日付形式で表現)を使用することです。 / Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

                                    NoteThis is a business version Id, not a resource version Id (see discussion)
                                    Control0..1
                                    Typestring
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Summarytrue
                                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    138. Observation.code.coding:LocalAssessmentCode.code
                                    Definition

                                    システムによって定義された構文のシンボル。シンボルは、定義されたコードまたはコーディングシステムによって定義された構文の式(例:調整後)である場合があります。 / A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

                                    Shortシステムによって定義された構文のシンボル / Symbol in syntax defined by the system
                                    Control1..1
                                    Typecode
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Must Supporttrue
                                    Summarytrue
                                    Requirements

                                    システム内の特定のコードを参照する必要があります。 / Need to refer to a particular code in the system.

                                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    140. Observation.code.coding:LocalAssessmentCode.display
                                    Definition

                                    システムのルールに従って、システム内のコードの意味の表現。 / A representation of the meaning of the code in the system, following the rules of the system.

                                    Shortシステムによって定義された表現 / Representation defined by the system
                                    Control1..1
                                    Typestring
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Must Supporttrue
                                    Summarytrue
                                    Requirements

                                    システムを知らない読者のために、コードの人間の読み取り可能な意味を持ち込むことができる必要があります。 / Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

                                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    142. Observation.code.coding:LocalAssessmentCode.userSelected
                                    Definition

                                    このコーディングがユーザーによって直接選択されたことを示します。利用可能なアイテムのピックリスト(コードまたはディスプレイ)。 / Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

                                    Shortこのコーディングがユーザーによって直接選択された場合 / If this coding was chosen directly by the user
                                    Comments

                                    一連の代替案の中で、直接選択されたコードが新しい翻訳の最も適切な出発点です。この要素の使用とその結果をより完全に明確にするためには、「直接選択された」ことについては曖昧さがあり、取引パートナー契約が必要になる場合があります。 / Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

                                    Control0..1
                                    Typeboolean
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Summarytrue
                                    Requirements

                                    これは、臨床安全基準として特定されています - この正確なシステム/コードペアは、いくつかのルールまたは言語処理に基づいてシステムによって推測されるのではなく、明示的に選択されたことです。 / This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

                                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    144. Observation.code.text
                                    Definition

                                    データを入力したユーザー、および/またはユーザーの意図された意味を表すユーザーによって見られる/選択/発言された概念の人間の言語表現。 / A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                                    Shortコンセプトの単純なテキスト表現 / Plain text representation of the concept
                                    Comments

                                    多くの場合、テキストはコーディングの1つの表示名と同じです。 / Very often the text is the same as a displayName of one of the codings.

                                    Control0..1
                                    Typestring
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Summarytrue
                                    Requirements

                                    用語からのコードは、それらを使用する人間のすべてのニュアンスを使用して、常に正しい意味をキャプチャするとは限りません。または、適切なコードがまったくない場合があります。これらの場合、テキストはソースの完全な意味をキャプチャするために使用されます。 / The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    146. Observation.subject
                                    Definition

                                    患者、または患者のグループ、場所、またはデバイスこの観察結果は、観察が置かれている記録についてであり、その記録にあります。観測の実際の焦点が被験者(または被験者の部分、または領域のサンプル)とは異なる場合、「フォーカス」要素または「コード」自体が観測の実際の焦点を指定します。 / The patient, or group of patients, location, or device this observation is about and into whose record the observation is placed. If the actual focus of the observation is different from the subject (or a sample of, part, or region of the subject), the focus element or the code itself specifies the actual focus of the observation.

                                    Short誰と/または観察が何であるか / Who and/or what the observation is about
                                    Comments

                                    この要素は1..1のカーディナリティになると予想されます。被験者が欠落している唯一の状況は、患者を知らないデバイスによって観察が行われる場合です。この場合、観察は、ある程度のコンテキスト/チャネルマッチング手法を介して患者と一致し、この時点で観察を更新する必要があります。 / One would expect this element to be a cardinality of 1..1. The only circumstance in which the subject can be missing is when the observation is made by a device that does not know the patient. In this case, the observation SHALL be matched to a patient through some context/channel matching technique, and at this point, the observation should be updated.

                                    Control0..1
                                    TypeReference(JP Core Patient Profile)
                                    Is Modifierfalse
                                    Summarytrue
                                    Requirements

                                    あなたが彼らが誰または何をしているのかわからない場合、観察には価値がありません。 / Observations have no value if you don't know who or what they're about.

                                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    148. Observation.focus
                                    Definition

                                    配偶者、親、胎児、ドナーなどの患者に関連する何かまたは患者に関連する誰かを表す記録の患者ではない場合の観察の実際の焦点。たとえば、母親の記録における胎児の観察。観察の焦点は、既存の状態、介入、被験者の食事、被験者の別の観察、または腫瘍や移植装置などの身体構造でもあります。ユースケースの例は、観測リソースを使用して、母親が子供の気管切開チューブを変更するように訓練されているかどうかを把握することです。この例では、子供は記録の患者であり、母親は焦点です。 / The actual focus of an observation when it is not the patient of record representing something or someone associated with the patient such as a spouse, parent, fetus, or donor. For example, fetus observations in a mother's record. The focus of an observation could also be an existing condition, an intervention, the subject's diet, another observation of the subject, or a body structure such as tumor or implanted device. An example use case would be using the Observation resource to capture whether the mother is trained to change her child's tracheostomy tube. In this example, the child is the patient of record and the mother is the focus.

                                    Shortそれが記録の主題に関するものではないとき、観察とは何か / What the observation is about, when it is not about the subject of record
                                    Comments

                                    通常、患者、または患者、場所、またはデバイスのグループである被験者について観察が行われ、被験者と観察のために直接測定されるものとの区別は、観察コード自体で指定されています(例えば、血液グルコース")そして、この要素を使用して個別に表現する必要はありません。標本への参照が必要な場合は、「標本」を使用してください。リソースの代わりにコードが必要な場合、ボディサイトまたは標準拡張[FocusCode](Extension-Observation-Focuscode.html)に「BodySite」を使用します。 / Typically, an observation is made about the subject - a patient, or group of patients, location, or device - and the distinction between the subject and what is directly measured for an observation is specified in the observation code itself ( e.g., "Blood Glucose") and does not need to be represented separately using this element. Use specimen if a reference to a specimen is required. If a code is required instead of a resource use either bodysite for bodysites or the standard extension focusCode.

                                    Control0..*
                                    TypeReference(Resource)
                                    Is Modifierfalse
                                    Summarytrue
                                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    150. Observation.encounter
                                    Definition

                                    この観察が行われるヘルスケアイベント(患者と医療提供者の相互作用など)。 / The healthcare event (e.g. a patient and healthcare provider interaction) during which this observation is made.

                                    Shortこの観察が行われるヘルスケアイベント / Healthcare event during which this observation is made
                                    Comments

                                    これは通常、イベントが発生したEncounterですが、いくつかのイベントは、Encounterの公式完了前または公式完了後に開始される可能性がありますが、それでも遭遇のコンテキストに関連しています(例:入院前の実験室テストなど)。 / This will typically be the encounter the event occurred within, but some events may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter (e.g. pre-admission laboratory tests).

                                    Control0..1
                                    TypeReference(Encounter)
                                    Is Modifierfalse
                                    Summarytrue
                                    Requirements

                                    一部の観察では、観察と特定のEncounterの間のリンクを知ることが重要かもしれません。 / For some observations it may be important to know the link between an observation and a particular encounter.

                                    Alternate NamesContext
                                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    152. Observation.effective[x]
                                    Definition

                                    観察された値が真実であると主張される時間または時間期。生物学的被験者の場合 - 例えばヒト患者 - これは通常、「生理学的に関連する時間」と呼ばれます。これは通常、手順または標本収集の時間ですが、日付/時刻のソースは不明であり、日付/時刻自体のみです。 / The time or time-period the observed value is asserted as being true. For biological subjects - e.g. human patients - this is usually called the "physiologically relevant time". This is usually either the time of the procedure or of specimen collection, but very often the source of the date/time is not known, only the date/time itself.

                                    Short測定日時
                                    Comments

                                    この観察が歴史的な報告でない限り、少なくとも日付が存在する必要があります。不正確または「ファジー」時間(たとえば、「朝食後」に採取された血糖測定)を記録するには、[タイミング](datatypes.html#タイミング)データタイプを使用して、測定を通常の生活イベントに結び付けます。 / At least a date should be present unless this observation is a historical report. For recording imprecise or "fuzzy" times (For example, a blood glucose measurement taken "after breakfast") use the Timing datatype which allow the measurement to be tied to regular life events.

                                    Control0..1
                                    TypedateTime
                                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Must Supporttrue
                                    Summarytrue
                                    Requirements

                                    観察が真実と見なされた時期を知ることは、その関連性にとって重要であり、傾向を決定します。 / Knowing when an observation was deemed true is important to its relevance as well as determining trends.

                                    Alternate NamesOccurrence
                                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    154. Observation.issued
                                    Definition

                                    このバージョンの観察結果は、通常、結果がレビューおよび検証された後にプロバイダーが利用できるようになりました。 / The date and time this version of the observation was made available to providers, typically after the results have been reviewed and verified.

                                    Short日付/時刻このバージョンが利用可能になりました / Date/Time this version was made available
                                    Comments

                                    レビューと検証を必要としない観察の場合、リソース自体の['lastupdated](resource-definitions.html#meta.lastupdated)と同じである可能性があります。特定の更新のレビューと検証を必要とする観察結果の場合、新しいバージョンを再度レビューして検証する必要がない非臨床的に重要な更新のために、リソース自体の「最後の飽きされた」時間と同じではないかもしれません。 / For Observations that don’t require review and verification, it may be the same as the [lastUpdated](http://hl7.org/fhir/R4/resource-definitions.html#Meta.lastUpdated) time of the resource itself. For Observations that do require review and verification for certain updates, it might not be the same as thelastUpdated` time of the resource itself due to a non-clinically significant update that doesn’t require the new version to be reviewed and verified again.

                                    Control0..1
                                    Typeinstant
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Summarytrue
                                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    156. Observation.performer
                                    Definition

                                    観察された値を「真」として主張する責任者。 / Who was responsible for asserting the observed value as "true".

                                    Short観察の責任者 / Who is responsible for the observation
                                    Control0..*
                                    TypeReference(Practitioner, PractitionerRole, Organization, CareTeam, Patient, RelatedPerson)
                                    Is Modifierfalse
                                    Summarytrue
                                    Requirements

                                    観察にある程度の自信を与える可能性があり、また、フォローアップの質問をどこに向けるべきかを示します。 / May give a degree of confidence in the observation and also indicates where follow-up questions should be directed.

                                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    158. Observation.value[x]
                                    Definition

                                    情報が単純な値を持っている場合、観察結果の結果として決定された情報。 / The information determined as a result of making the observation, if the information has a simple value.

                                    Short結果値・結果値単位
                                    Comments

                                    観察にはあります。1)ここでの単一の値、2)関連する値とコンポーネント値のセット、または3)関連またはコンポーネント値のセットのみ。値が存在する場合、この要素のデータ型は、viscervation.codeによって決定する必要があります。フィールドが通常コーディングされている場合、または観測に関連付けられたタイプの場合、文字列の代わりにテキストのみを持つCodeableconecteが使用されます。コードはコード化された値を定義します。追加のガイダンスについては、以下の[[メモ]セクション]([観察.html#注)を参照してください。 / An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                                    Control0..1
                                    This element is affected by the following invariants: obs-7
                                    TypeChoice of: Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period
                                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Must Supporttrue
                                    Must Support TypesNo must-support rules about the choice of types/profiles
                                    Summarytrue
                                    Requirements

                                    観測は値を持つように存在しますが、それが誤っている場合、または観測のグループを表す場合はそうではありません。 / An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    160. Observation.dataAbsentReason
                                    Definition

                                    要素観測値の期待値が欠落している理由を提供します。 / Provides a reason why the expected value in the element Observation.value[x] is missing.

                                    Short結果が欠落している理由 / Why the result is missing
                                    Comments

                                    NULLまたは例外的な値は、FHIR観測で2つの方法を表すことができます。1つの方法は、それらを単に値セットに含めるだけで、値の例外を表すことです。たとえば、血清学テストの測定値は、「検出」、「検出されていない」、「決定的でない」、または「標本の不十分」である可能性があります。

                                    別の方法は、実際の観測に値要素を使用し、明示的なDataBsEntreason要素を使用して例外的な値を記録することです。たとえば、測定が完了していないときに、DataBsentrasonコード「エラー」を使用できます。報告する値がある場合にのみ、観察が報告される可能性があることに注意してください。たとえば、異なるセルカウント値は、> 0の場合にのみ報告される場合があります。これらのオプションのため、ヌルまたは例外的な値の一般的な観測を解釈するには、ユースケース契約が必要です。 / Null or exceptional values can be represented two ways in FHIR Observations. One way is to simply include them in the value set and represent the exceptions in the value. For example, measurement values for a serology test could be "detected", "not detected", "inconclusive", or "specimen unsatisfactory".

                                    The alternate way is to use the value element for actual observations and use the explicit dataAbsentReason element to record exceptional values. For example, the dataAbsentReason code "error" could be used when the measurement was not completed. Note that an observation may only be reported if there are values to report. For example differential cell counts values may be reported only when > 0. Because of these options, use-case agreements are required to interpret general observations for null or exceptional values.

                                    Control0..1
                                    This element is affected by the following invariants: obs-6
                                    BindingUnless not suitable, these codes SHALL be taken from DataAbsentReason
                                    (extensible to http://hl7.org/fhir/ValueSet/data-absent-reason|4.0.1)

                                    結果( balue.value [x])が欠落している理由を指定するコード。 / Codes specifying why the result (Observation.value[x]) is missing.

                                    TypeCodeableConcept
                                    Is Modifierfalse
                                    Summaryfalse
                                    Requirements

                                    多くの結果には、測定で例外的な値を処理する必要があります。 / For many results it is necessary to handle exceptional values in measurements.

                                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    162. Observation.interpretation
                                    Definition

                                    観測値のカテゴリー評価。たとえば、高、低、正常。 / A categorical assessment of an observation value. For example, high, low, normal.

                                    Short高、低、正常など。 / High, low, normal, etc.
                                    Comments

                                    歴史的に実験室の結果(「異常なフラグ」と呼ばれる)に使用されていたため、その使用は、コード化された解釈が関連する他のユースケースにまで及びます。多くの場合、1つ以上の単純なコンパクトコードとして報告されているこの要素は、結果の意味/正常性のステータスを示すレポートとフローシートの結果値に隣接することがよくあります。 / Historically used for laboratory results (known as 'abnormal flag' ), its use extends to other use cases where coded interpretations are relevant. Often reported as one or more simple compact codes this element is often placed adjacent to the result value in reports and flow sheets to signal the meaning/normalcy status of the result.

                                    Control0..*
                                    BindingUnless not suitable, these codes SHALL be taken from ObservationInterpretationCodes
                                    (extensible to http://hl7.org/fhir/ValueSet/observation-interpretation|4.0.1)

                                    観測の解釈を識別するコード。 / Codes identifying interpretations of observations.

                                    TypeCodeableConcept
                                    Is Modifierfalse
                                    Summaryfalse
                                    Requirements

                                    いくつかの結果、特に数値の結果については、結果の重要性を完全に理解するために解釈が必要です。 / For some results, particularly numeric results, an interpretation is necessary to fully understand the significance of a result.

                                    Alternate NamesAbnormal Flag
                                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    164. Observation.note
                                    Definition

                                    修正情報の場合、修正事由を設定する。

                                    Short修正事由
                                    Comments

                                    観察に関する一般的な声明、またはその解釈に関連する場合、重要な、予期しない、または信頼できない結果の値、またはそのソースに関する情報に関する声明が含まれる場合があります。 / May include general statements about the observation, or statements about significant, unexpected or unreliable results values, or information about its source when relevant to its interpretation.

                                    Control0..*
                                    TypeAnnotation
                                    Is Modifierfalse
                                    Summaryfalse
                                    Requirements

                                    無料のテキストの追加情報を提供できる必要があります。 / Need to be able to provide free text additional information.

                                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    166. Observation.bodySite
                                    Definition

                                    観察が行われた被験者の本体のサイト(つまり、ターゲットサイト)を示します。 / Indicates the site on the subject's body where the observation was made (i.e. the target site).

                                    Short観察された身体部分 / Observed body part
                                    Comments

                                    観察結果で見つかったコードで暗黙的ではない場合にのみ使用されます。多くのシステムでは、これはインラインコンポーネントの代わりに関連する観察として表される場合があります。

                                    ユースケースでは、ボディサイトを個別のリソースとして処理する必要がある場合(たとえば、個別に識別および追跡するため)、標準の拡張[BodySite](Extension-BodySite.html)を使用します。 / Only used if not implicit in code found in Observation.code. In many systems, this may be represented as a related observation instead of an inline component.

                                    If the use case requires BodySite to be handled as a separate resource (e.g. to identify and track separately) then use the standard extension bodySite.

                                    Control0..1
                                    BindingFor example codes, see SNOMEDCTBodyStructures
                                    (example to http://hl7.org/fhir/ValueSet/body-site|4.0.1)

                                    解剖学的場所を説明するコード。左右性が含まれる場合があります。 / Codes describing anatomical locations. May include laterality.

                                    TypeCodeableConcept
                                    Is Modifierfalse
                                    Summaryfalse
                                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    168. Observation.method
                                    Definition

                                    観察を実行するために使用されるメカニズムを示します。 / Indicates the mechanism used to perform the observation.

                                    Shortそれがどのように行われたか / How it was done
                                    Comments

                                    CODERATION.CODEのコードに暗黙的ではない場合にのみ使用されます。 / Only used if not implicit in code for Observation.code.

                                    Control0..1
                                    BindingFor example codes, see ObservationMethods
                                    (example to http://hl7.org/fhir/ValueSet/observation-methods|4.0.1)

                                    単純な観測の方法。 / Methods for simple observations.

                                    TypeCodeableConcept
                                    Is Modifierfalse
                                    Summaryfalse
                                    Requirements

                                    場合によっては、メソッドは結果に影響を与える可能性があるため、結果を比較できるか、結果の重要性を決定できるかどうかを判断するために使用されます。 / In some cases, method can impact results and is thus used for determining whether results can be compared or determining significance of results.

                                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    170. Observation.specimen
                                    Definition

                                    この観察が行われたときに使用された標本。 / The specimen that was used when this observation was made.

                                    Shortこの観察に使用される標本 / Specimen used for this observation
                                    Comments

                                    「観察」で見つかったコードで暗黙的ではない場合にのみ使用する必要があります。観察は標本自体では行われません。それらは主題で作られていますが、多くの場合、標本の手段によって作られています。標本はしばしば関与していますが、それらは常に明示的に追跡され、報告されているわけではないことに注意してください。また、標本を明示的に追跡するコンテキストで観測リソースを使用できることに注意してください(例:診断レポート)。 / Should only be used if not implicit in code found in Observation.code. Observations are not made on specimens themselves; they are made on a subject, but in many cases by the means of a specimen. Note that although specimens are often involved, they are not always tracked and reported explicitly. Also note that observation resources may be used in contexts that track the specimen explicitly (e.g. Diagnostic Report).

                                    Control0..1
                                    TypeReference(Specimen)
                                    Is Modifierfalse
                                    Summaryfalse
                                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    172. Observation.device
                                    Definition

                                    観測データを生成するために使用されるデバイス。 / The device used to generate the observation data.

                                    Short(測定)デバイス / (Measurement) Device
                                    Comments

                                    これは、結果の送信に関与するデバイス、たとえばゲートウェイを表すことを意図していないことに注意してください。このようなデバイスは、関連する出所リソースを使用して文書化される場合があります。 / Note that this is not meant to represent a device involved in the transmission of the result, e.g., a gateway. Such devices may be documented using the Provenance resource where relevant.

                                    Control0..1
                                    TypeReference(Device, DeviceMetric)
                                    Is Modifierfalse
                                    Summaryfalse
                                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    174. Observation.referenceRange
                                    Definition

                                    通常または推奨範囲と比較して、値を解釈する方法に関するガイダンス。複数の参照範囲は「または」として解釈されます。言い換えれば、2つの異なるターゲット集団を表すために、2つの「参照」要素が使用されます。 / Guidance on how to interpret the value by comparison to a normal or recommended range. Multiple reference ranges are interpreted as an "OR". In other words, to represent two distinct target populations, two referenceRange elements would be used.

                                    Short解釈のためのガイドを提供します / Provides guide for interpretation
                                    Comments

                                    ほとんどの観測には、一般的な参照範囲が1つしかありません。システムは、患者に関する知識(患者の年齢、性別、体重、その他の要因に固有)に基づいて、関連する参照範囲のみを供給することを制限することを選択できますが、これは不可能または適切ではない場合があります。複数の参照範囲が提供される場合は、それらの間の違いを参照範囲および/または年齢特性で提供する必要があります。 / Most observations only have one generic reference range. Systems MAY choose to restrict to only supplying the relevant reference range based on knowledge about the patient (e.g., specific to the patient's age, gender, weight and other factors), but this might not be possible or appropriate. Whenever more than one reference range is supplied, the differences between them SHOULD be provided in the reference range and/or age properties.

                                    Control0..*
                                    TypeBackboneElement
                                    Is Modifierfalse
                                    Summaryfalse
                                    Requirements

                                    どの値が「正常」と見なされるかを知ることは、特定の結果の重要性を評価するのに役立ちます。さまざまなコンテキストに複数の参照範囲を提供できる必要があります。 / Knowing what values are considered "normal" can help evaluate the significance of a particular result. Need to be able to provide multiple reference ranges for different contexts.

                                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    obs-3: 少なくとも低いまたは高またはテキストが必要です / Must have at least a low or a high or text (low.exists() or high.exists() or text.exists())
                                    176. Observation.referenceRange.id
                                    Definition

                                    リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                    Short要素間参照のための一意のID / Unique id for inter-element referencing
                                    Control0..1
                                    Typestring
                                    Is Modifierfalse
                                    XML FormatIn the XML format, this property is represented as an attribute.
                                    Summaryfalse
                                    178. Observation.referenceRange.extension
                                    Definition

                                    要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                    Short実装で定義された追加のコンテンツ / Additional content defined by implementations
                                    Comments

                                    拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                    Control0..*
                                    TypeExtension
                                    Is Modifierfalse
                                    Summaryfalse
                                    Alternate Namesextensions, user content
                                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                    180. Observation.referenceRange.modifierExtension
                                    Definition

                                    要素の基本的な定義の一部ではなく、それが含まれている要素の理解、および/または含まれる要素の子孫の理解を変更するために使用される場合があります。通常、修飾子要素は否定または資格を提供します。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。アプリケーションの処理リソースは、修飾子拡張機能をチェックする必要があります。

                                    モディファイア拡張は、リソースまたはdomainResource上の要素の意味を変更してはなりません(修飾軸自体の意味を変更することはできません)。 / May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                    Short認識されていなくても無視できない拡張機能 / Extensions that cannot be ignored even if unrecognized
                                    Comments

                                    拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                    Control0..*
                                    TypeExtension
                                    Is Modifiertrue because 修飾子拡張は、それらを含む要素の意味または解釈を変更することが期待されています / Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                    Summarytrue
                                    Requirements

                                    修飾子拡張機能により、安全に無視できる大部分の拡張機能と明確に区別できるように、安全に無視できない拡張機能が可能になります。これにより、実装者が拡張の存在を禁止する必要性を排除することにより、相互運用性が促進されます。詳細については、[修飾子拡張の定義](拡張性.html#modifierextension)を参照してください。 / Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                    Alternate Namesextensions, user content, modifiers
                                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                    182. Observation.referenceRange.low
                                    Definition

                                    参照範囲の低境界の値。参照範囲のエンドポイントの低い境界には、値が含まれています(例:参照範囲は> = 5- <= 9)。下限が省略されている場合、それは意味がないと想定されます(例:参照範囲は<= 2.3)。 / The value of the low bound of the reference range. The low bound of the reference range endpoint is inclusive of the value (e.g. reference range is >=5 - <=9). If the low bound is omitted, it is assumed to be meaningless (e.g. reference range is <=2.3).

                                    Short関連する場合は低レンジ / Low Range, if relevant
                                    Control0..1
                                    This element is affected by the following invariants: obs-3
                                    TypeQuantity(SimpleQuantity)
                                    Is Modifierfalse
                                    Summaryfalse
                                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    184. Observation.referenceRange.high
                                    Definition

                                    参照範囲の強境界の値。参照範囲のエンドポイントの高境界には、値が含まれています(例:参照範囲は> = 5- <= 9)。高バウンドが省略されている場合、それは無意味であると想定されます(例:参照範囲は> = 2.3)。 / The value of the high bound of the reference range. The high bound of the reference range endpoint is inclusive of the value (e.g. reference range is >=5 - <=9). If the high bound is omitted, it is assumed to be meaningless (e.g. reference range is >= 2.3).

                                    Short関連する場合、高レンジ / High Range, if relevant
                                    Control0..1
                                    This element is affected by the following invariants: obs-3
                                    TypeQuantity(SimpleQuantity)
                                    Is Modifierfalse
                                    Summaryfalse
                                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    186. Observation.referenceRange.type
                                    Definition

                                    適用されるターゲット参照母集団のどの部分を示すコード。たとえば、通常または治療範囲。 / Codes to indicate the what part of the targeted reference population it applies to. For example, the normal or therapeutic range.

                                    Short参照範囲予選 / Reference range qualifier
                                    Comments

                                    複数の範囲がある場合は、これに浸透する必要があります。この要素が存在しない場合、通常の範囲が想定されます。 / This SHOULD be populated if there is more than one range. If this element is not present then the normal range is assumed.

                                    Control0..1
                                    BindingThe codes SHOULD be taken from ObservationReferenceRangeMeaningCodes
                                    (preferred to http://hl7.org/fhir/ValueSet/referencerange-meaning|4.0.1)

                                    参照範囲の意味のコード。 / Code for the meaning of a reference range.

                                    TypeCodeableConcept
                                    Is Modifierfalse
                                    Summaryfalse
                                    Requirements

                                    適切な解釈のために、これが正常、推奨、治療など、どのような参照範囲を言うことができる必要があります。 / Need to be able to say what kind of reference range this is - normal, recommended, therapeutic, etc., - for proper interpretation.

                                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    188. Observation.referenceRange.appliesTo
                                    Definition

                                    この参照範囲が適用される対象母集団を示すコード。たとえば、参照範囲は、通常の集団または特定の性別または人種に基づいている場合があります。複数の「Applesto」は、ターゲット集団の「および」として解釈されます。たとえば、アフリカ系アメリカ人の女性の対象集団を代表するために、女性のコードとアフリカ系アメリカ人のコードの両方が使用されます。 / Codes to indicate the target population this reference range applies to. For example, a reference range may be based on the normal population or a particular sex or race. Multiple appliesTo are interpreted as an "AND" of the target populations. For example, to represent a target population of African American females, both a code of female and a code for African American would be used.

                                    Short参照範囲の母集団 / Reference range population
                                    Comments

                                    複数の範囲がある場合は、これに浸透する必要があります。この要素が存在しない場合、通常の母集団が想定されます。 / This SHOULD be populated if there is more than one range. If this element is not present then the normal population is assumed.

                                    Control0..*
                                    BindingFor example codes, see ObservationReferenceRangeAppliesToCodes
                                    (example to http://hl7.org/fhir/ValueSet/referencerange-appliesto|4.0.1)

                                    参照範囲が適用される母集団を識別するコード。 / Codes identifying the population the reference range applies to.

                                    TypeCodeableConcept
                                    Is Modifierfalse
                                    Summaryfalse
                                    Requirements

                                    適切な解釈のためにターゲット母集団を特定できる必要があります。 / Need to be able to identify the target population for proper interpretation.

                                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    190. Observation.referenceRange.age
                                    Definition

                                    この参照範囲が適用される年齢。意味がそう言っている場合、これは新生児の年齢(期間の週数)です。 / The age at which this reference range is applicable. This is a neonatal age (e.g. number of weeks at term) if the meaning says so.

                                    Short適用される年齢範囲、関連する場合 / Applicable age range, if relevant
                                    Control0..1
                                    TypeRange
                                    Is Modifierfalse
                                    Summaryfalse
                                    Requirements

                                    一部の分析物は、年齢によって大きく異なります。 / Some analytes vary greatly over age.

                                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    192. Observation.referenceRange.text
                                    Definition

                                    テキストベースの参照範囲の観測では、定量的範囲が観測に適していない場合に使用される場合があります。例は、「ネガティブ」の参照値、または「通常」のリストまたはテーブルです。 / Text based reference range in an observation which may be used when a quantitative range is not appropriate for an observation. An example would be a reference value of "Negative" or a list or table of "normals".

                                    Short観察中のテキストベースの参照範囲 / Text based reference range in an observation
                                    Control0..1
                                    Typestring
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Summaryfalse
                                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    194. Observation.hasMember
                                    Definition

                                    この観察は、グループのメンバーとしてのターゲットを含むグループ観察(たとえば、バッテリー、テストのパネル、重要な兆候測定のセット)です。 / This observation is a group observation (e.g. a battery, a panel of tests, a set of vital sign measurements) that includes the target as a member of the group.

                                    Short観察グループに属する関連リソース / Related resource that belongs to the Observation group
                                    Comments

                                    この要素を使用する場合、観察には通常、値または関連するリソースのセットがありますが、どちらも場合によっては存在する場合があります。観察結果がグループで組み立てられる方法についての議論については、以下の[注](obervation.html#obsgrouping)を参照してください。システムは、[Questionnairesponse](Questionnearesponse.html)の結果を最終スコアに計算し、観察としてスコアを表す場合があることに注意してください。 / When using this element, an observation will typically have either a value or a set of related resources, although both may be present in some cases. For a discussion on the ways Observations can assembled in groups together, see Notes below. Note that a system may calculate results from QuestionnaireResponse into a final score and represent the score as an Observation.

                                    Control0..*
                                    TypeReference(Observation, QuestionnaireResponse, MolecularSequence)
                                    Is Modifierfalse
                                    Summarytrue
                                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    196. Observation.derivedFrom
                                    Definition

                                    例えば、患者入力フォームのデータを観察結果として反映した場合に元となるQuestionnaireResponseの識別子を設定する。

                                    Short観察結果の派生元
                                    Comments

                                    この要素にリストされているすべての参照選択は、導出された値のソースとなる可能性のある臨床観察およびその他の測定値を表すことができます。最も一般的な参照は、別の観察です。観察結果がグループで組み立てられる方法についての議論については、以下の[注](obervation.html#obsgrouping)を参照してください。 / All the reference choices that are listed in this element can represent clinical observations and other measurements that may be the source for a derived value. The most common reference will be another Observation. For a discussion on the ways Observations can assembled in groups together, see Notes below.

                                    Control0..*
                                    TypeReference(DocumentReference, ImagingStudy, Media, QuestionnaireResponse, Observation, MolecularSequence)
                                    Is Modifierfalse
                                    Must Supportfalse
                                    Summarytrue
                                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    198. Observation.component
                                    Definition

                                    一部の観察には、複数のコンポーネント観測があります。これらのコンポーネント観測は、同じ属性を共有する個別のコード値ペアとして表されます。例には、血圧測定のための収縮期および拡張期成分観察と、遺伝学の観察のための複数の成分観察が含まれます。 / Some observations have multiple component observations. These component observations are expressed as separate code value pairs that share the same attributes. Examples include systolic and diastolic component observations for blood pressure measurement and multiple component observations for genetics observations.

                                    Shortコンポーネントの結果 / Component results
                                    Comments

                                    観測をグループで一緒に組み立てる方法についての議論については、以下の[Notes](obervation.html#notes)を参照してください。 / For a discussion on the ways Observations can be assembled in groups together see Notes below.

                                    Control0..*
                                    TypeBackboneElement
                                    Is Modifierfalse
                                    Summarytrue
                                    Requirements

                                    コンポーネント観測は、観測リソースで主要な観測と同じ属性を共有し、常に単一の観測の一部を扱われます(分離できません)。ただし、一次観測値の参照範囲はコンポーネント値によって継承されず、各コンポーネント観測に適切な場合は必要です。 / Component observations share the same attributes in the Observation resource as the primary observation and are always treated a part of a single observation (they are not separable). However, the reference range for the primary observation value is not inherited by the component values and is required when appropriate for each component observation.

                                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    200. Observation.component.id
                                    Definition

                                    リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                    Short要素間参照のための一意のID / Unique id for inter-element referencing
                                    Control0..1
                                    Typestring
                                    Is Modifierfalse
                                    XML FormatIn the XML format, this property is represented as an attribute.
                                    Summaryfalse
                                    202. Observation.component.extension
                                    Definition

                                    要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                    Short実装で定義された追加のコンテンツ / Additional content defined by implementations
                                    Comments

                                    拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                    Control0..*
                                    TypeExtension
                                    Is Modifierfalse
                                    Summaryfalse
                                    Alternate Namesextensions, user content
                                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                    204. Observation.component.modifierExtension
                                    Definition

                                    要素の基本的な定義の一部ではなく、それが含まれている要素の理解、および/または含まれる要素の子孫の理解を変更するために使用される場合があります。通常、修飾子要素は否定または資格を提供します。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。アプリケーションの処理リソースは、修飾子拡張機能をチェックする必要があります。

                                    モディファイア拡張は、リソースまたはdomainResource上の要素の意味を変更してはなりません(修飾軸自体の意味を変更することはできません)。 / May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                    Short認識されていなくても無視できない拡張機能 / Extensions that cannot be ignored even if unrecognized
                                    Comments

                                    拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                    Control0..*
                                    TypeExtension
                                    Is Modifiertrue because 修飾子拡張は、それらを含む要素の意味または解釈を変更することが期待されています / Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                    Summarytrue
                                    Requirements

                                    修飾子拡張機能により、安全に無視できる大部分の拡張機能と明確に区別できるように、安全に無視できない拡張機能が可能になります。これにより、実装者が拡張の存在を禁止する必要性を排除することにより、相互運用性が促進されます。詳細については、[修飾子拡張の定義](拡張性.html#modifierextension)を参照してください。 / Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                    Alternate Namesextensions, user content, modifiers
                                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                    206. Observation.component.code
                                    Definition

                                    観察されたものについて説明します。これは、「コード」と呼ばれることがあります。 / Describes what was observed. Sometimes this is called the observation "code".

                                    Shortコンポーネント観測の種類(コード /タイプ) / Type of component observation (code / type)
                                    Comments

                                    すべて code-valueおよびcomponent.code-component.valueペアを考慮する必要があります。観察の意味を正しく理解する必要があります。 / All code-value and component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

                                    Control1..1
                                    BindingFor example codes, see LOINCCodes
                                    (example to http://hl7.org/fhir/ValueSet/observation-codes|4.0.1)

                                    単純な観測の名前を識別するコード。 / Codes identifying names of simple observations.

                                    TypeCodeableConcept
                                    Is Modifierfalse
                                    Summarytrue
                                    Requirements

                                    どのような観察が行われているかを知ることは、観察を理解するために不可欠です。 / Knowing what kind of observation is being made is essential to understanding the observation.

                                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    208. Observation.component.value[x]
                                    Definition

                                    情報が単純な値を持っている場合、観察結果の結果として決定された情報。 / The information determined as a result of making the observation, if the information has a simple value.

                                    Short実際のコンポーネントの結果 / Actual component result
                                    Comments

                                    観察には一連のコンポーネント観測がある場合に使用されます。観察には、値(APGARスコアなど)とコンポーネントの観測(APGARスコアが導き出された観測)の両方があります。値が存在する場合、この要素のデータ型は、viscervation.codeによって決定する必要があります。フィールドが通常コーディングされている場合、または観測に関連付けられたタイプの場合、文字列の代わりにテキストのみを持つCodeableconecteが使用されます。コードはコード化された値を定義します。追加のガイダンスについては、以下の[[メモ]セクション]([観察.html#注)を参照してください。 / Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                                    Control0..1
                                    TypeChoice of: Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period
                                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Summarytrue
                                    Requirements

                                    観測は値を持つように存在しますが、それが誤っている場合、または観測のグループを表す場合はそうではありません。 / An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    210. Observation.component.dataAbsentReason
                                    Definition

                                    Element obervation.component.value [x]の期待値が欠落している理由を提供します。 / Provides a reason why the expected value in the element Observation.component.value[x] is missing.

                                    Shortコンポーネントの結果が欠落している理由 / Why the component result is missing
                                    Comments

                                    「null」または例外的な値は、FHIR観測で2つの方法を表すことができます。1つの方法は、それらを単に値セットに含めるだけで、値の例外を表すことです。たとえば、血清学テストの測定値は、「検出」、「検出されない」、「決定的でない」、または「テストなし」です。

                                    別の方法は、実際の観測に値要素を使用し、明示的なDataBsEntreason要素を使用して例外的な値を記録することです。たとえば、測定が完了していないときに、DataBsentrasonコード「エラー」を使用できます。これらのオプションのため、一般的な観測を例外的な価値のために解釈するには、ユースケース契約が必要です。 / "Null" or exceptional values can be represented two ways in FHIR Observations. One way is to simply include them in the value set and represent the exceptions in the value. For example, measurement values for a serology test could be "detected", "not detected", "inconclusive", or "test not done".

                                    The alternate way is to use the value element for actual observations and use the explicit dataAbsentReason element to record exceptional values. For example, the dataAbsentReason code "error" could be used when the measurement was not completed. Because of these options, use-case agreements are required to interpret general observations for exceptional values.

                                    Control0..1
                                    This element is affected by the following invariants: obs-6
                                    BindingUnless not suitable, these codes SHALL be taken from DataAbsentReason
                                    (extensible to http://hl7.org/fhir/ValueSet/data-absent-reason|4.0.1)

                                    結果( balue.value [x])が欠落している理由を指定するコード。 / Codes specifying why the result (Observation.value[x]) is missing.

                                    TypeCodeableConcept
                                    Is Modifierfalse
                                    Summaryfalse
                                    Requirements

                                    多くの結果には、測定で例外的な値を処理する必要があります。 / For many results it is necessary to handle exceptional values in measurements.

                                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    212. Observation.component.interpretation
                                    Definition

                                    観測値のカテゴリー評価。たとえば、高、低、正常。 / A categorical assessment of an observation value. For example, high, low, normal.

                                    Short高、低、正常など。 / High, low, normal, etc.
                                    Comments

                                    歴史的に実験室の結果(「異常なフラグ」と呼ばれる)に使用されていたため、その使用は、コード化された解釈が関連する他のユースケースにまで及びます。多くの場合、1つ以上の単純なコンパクトコードとして報告されているこの要素は、結果の意味/正常性のステータスを示すレポートとフローシートの結果値に隣接することがよくあります。 / Historically used for laboratory results (known as 'abnormal flag' ), its use extends to other use cases where coded interpretations are relevant. Often reported as one or more simple compact codes this element is often placed adjacent to the result value in reports and flow sheets to signal the meaning/normalcy status of the result.

                                    Control0..*
                                    BindingUnless not suitable, these codes SHALL be taken from ObservationInterpretationCodes
                                    (extensible to http://hl7.org/fhir/ValueSet/observation-interpretation|4.0.1)

                                    観測の解釈を識別するコード。 / Codes identifying interpretations of observations.

                                    TypeCodeableConcept
                                    Is Modifierfalse
                                    Summaryfalse
                                    Requirements

                                    いくつかの結果、特に数値の結果については、結果の重要性を完全に理解するために解釈が必要です。 / For some results, particularly numeric results, an interpretation is necessary to fully understand the significance of a result.

                                    Alternate NamesAbnormal Flag
                                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    214. Observation.component.referenceRange
                                    Definition

                                    通常または推奨範囲と比較して、値を解釈する方法に関するガイダンス。 / Guidance on how to interpret the value by comparison to a normal or recommended range.

                                    Shortコンポーネント結果の解釈のためのガイドを提供します / Provides guide for interpretation of component result
                                    Comments

                                    ほとんどの観測には、一般的な参照範囲が1つしかありません。システムは、患者に関する知識(患者の年齢、性別、体重、その他の要因に固有)に基づいて、関連する参照範囲のみを供給することを制限することを選択できますが、これは不可能または適切ではない場合があります。複数の参照範囲が提供される場合は、それらの間の違いを参照範囲および/または年齢特性で提供する必要があります。 / Most observations only have one generic reference range. Systems MAY choose to restrict to only supplying the relevant reference range based on knowledge about the patient (e.g., specific to the patient's age, gender, weight and other factors), but this might not be possible or appropriate. Whenever more than one reference range is supplied, the differences between them SHOULD be provided in the reference range and/or age properties.

                                    Control0..*
                                    TypeSeettp://hl7.org/fhir/StructureDefinition/Observation#Observation.referenceRange
                                    Is Modifierfalse
                                    Summaryfalse
                                    Requirements

                                    どの値が「正常」と見なされるかを知ることは、特定の結果の重要性を評価するのに役立ちます。さまざまなコンテキストに複数の参照範囲を提供できる必要があります。 / Knowing what values are considered "normal" can help evaluate the significance of a particular result. Need to be able to provide multiple reference ranges for different contexts.

                                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))